View PRF15BB102RB6RC_6472694.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cat.no.r90e-13 posistorr for circuit protection r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
eu rohs compliant s all the products in this catalog comply with eu rohs. s eu rohs is "the european directive 2011/65/eu on the restriction of the use of certain hazardous substances in electrical and electronic equipment." s for more details, please refer to our website 'murata's approach for eu rohs' (http://www.murata.com/info/rohs.html). r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. contents posistorr and "posistor" in this catalog are the trademarks of murata manufacturing co., ltd. part numbering 2 basic characteristics of posistorr 5 selection guide 7 application matrix 8 application notes 9 overcurrent protection chip type 13 chip type specifications and test methods 20 overcurrent protection narrow current band 30v series 22 overcurrent protection narrow current band 51/60v series 25 overcurrent protection narrow current band 140v series 30 overcurrent protection 16v series 33 overcurrent protection 24/30/32v series 36 overcurrent protection 56/80v series 43 overcurrent protection 125/140v series 49 overcurrent protection 250/265v series 56 ptgl series narrow current band specifications and test methods 64 ptgl series specifications and test methods 66 inrush current suppression (less than 100f) 67 inrush current suppression for high capacitance (100f or more) 68 inrush current suppression specifications and test methods 69 overheat sensing chip tight tolerance type 70 overheat sensing chip type 71 overheat sensing chip type (related data) 72 overheat sensing chip tight tolerance type (reference data) 73 overheat sensing chip type (reference data) 76 overheat sensing chip tight tolerance type specifications and test methods 78 overheat sensing chip type specifications and test methods 81 overheat sensing lead type 82 temperature sensor lead type specifications and test methods 86 !caution/notice 87 chip type prg/prf series package 97 lead type ptgl/ptf series package 98 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 2 o part numbering y m e 18 w g r bb t 470 u b1 i rb pr q qproduct id wseries rtemperature characteristics yresistance tolerance uindividual specifications ptc thermistors (posistorr) for overcurrent protection chip type pr ptc thermistors chip type m g for overcurrent protection bb bc curie point 100c curie point 90c 20% temperature characteristics b1 individual specifications product id code code code series resistance tolerance code (part number) tresistance expressed by three-digit alphanumerics. the unit is ohm (). the first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. if there is a decimal point, it is expressed by the capital letter "r." in this case, all figures are significant digits. 470 471 ex. ex. 47 470 code resistance structure, others edimensions (lgw) 18 21 1.60g0.80mm 2.00g1.25mm code dimensions (lgw) 0603 0805 eia ipackaging ra rb rk packaging code embossed taping (4mm pitch) (4000 pcs.) paper taping (4mm pitch) (4000 pcs.) embossed taping (4mm pitch) (3000 pcs.)
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 3 y q e 18 w f r bb t 471 u b5 i rb pr q qproduct id wseries rtemperature characteristics yresistance tolerance uindividual specifications ptc thermistors (posistorr) for overheat sensing chip type pr ptc thermistors chip type q r f for overheat sensing ar as ba bb bc bd be bf bg curie point 120c curie point 130c curie point 110c curie point 100c curie point 90c curie point 80c curie point 70c curie point 60c curie point 50c special tolerance special tolerance temperature characteristics b5 individual specifications product id code code code series resistance tolerance 5c 3c sensing temp. tolerance code (part number) tresistance expressed by three figures. the unit is ohm (). the first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. 471 ex. ex. 470 code resistance structure, others edimensions (lgw) 15 18 21 1.00g0.50mm 1.60g0.80mm 2.00g1.25mm code dimensions (lgw) 0402 0603 0805 eia ipackaging ra rb rc packaging code embossed taping (4mm pitch) (4000 pcs.) paper taping (4mm pitch) (4000 pcs.) paper taping (2mm pitch) (10000 pcs.)
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 4 qproduct id edimensions yresistance tolerance uindividual specifications ptc thermistors (posistorr) for overcurrent protection / for inrush current suppression / for overheat sensing lead type pt ptc thermistors h k m n q 25% 10% 20% 30% special tolerance 3p51 individual specifications product id code resistance tolerance code (part number) tresistance expressed by three-digit alphanumerics. the unit is ohm (). the first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. if there is a decimal point, it is expressed by the capital letter "r." in this case, all figures are significant digits. r22 2r2 220 ex. ex. 0.22 2.2 22 code resistance lead type, others ipackaging a* b* packaging code ammo pack bulk wseries fl fm gl for overheat sensing lead type for overheat sensing with lug-terminal for current control (over current protection inrush current suppression) lead type code series rtemperature characteristics 04 05 07 09 10 12 13 14 16 18 20 ar as ba bb bc bd be bf bg bh curie point 120c curie point 130c curie point 110c curie point 100c curie point 90c curie point 80c curie point 70c curie point 60c curie point 50c curie point 40c temperature characteristics code code dimensions nominal body diameter 4mm series nominal body diameter 5mm series nominal body diameter 7mm series nominal body diameter 9mm series nominal body diameter 10mm series nominal body diameter 12mm series nominal body diameter 13mm series nominal body diameter 14mm series nominal body diameter 16mm series nominal body diameter 18mm series nominal body diameter 20mm series u 3p51 r ar w gl t 220 y m i a0 pt q e 07
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 5 1. resistance - temperature characteristics posistorr has three main characteristics. although there is a negligible difference between the normal and "curie point" temperature, posistorr shows almost constant resistance-temperature characteristics. yet they have resistance-temperature characteristics that cause resistance to sharply increase when the temperature exceeds the curie point. the curie point (c.p.) is defined as the temperature at which the resistance value is twice the one at 25c. 2. current - voltage characteristics (static characteristic) this shows the relation between applied voltage when voltage applied to posistorr causes balancing of inner heating and outer thermal dissipation and stabilized current. this has both a maximum point of current and constant output power. 3. current - time characteristics (dynamic characteristic) this shows the relation between current and time before inner heating and outer thermal dissipation arrive at equilibrium state. this features having large initial current and abruptly continuous attenuating portion. resistance - temperature characteristic cbasic characteristics resistance change ratio, r/r25c 10 5 10 4 10 3 10 2 10 1 0 50 100 150 200 temperature (c) current - voltage characteristic (static characteristic) current - time characteristic (dynamic characteristic) ta=25c 10 10 10 1 3 2 2 0.1 1 10 10 current (ma) voltage (v) 1.5 1.0 0.5 current (a) time (sec.) ta=25c bd bc bb ar basic characteristics of posistorr c.p. (ar: 120c)
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 6 technical terms load curve of circuit and voltage - current characteristics of posistorr 1. protective threshold current the maximum current value is called the "protective threshold current" for voltage vs. current characteristics (static). when smaller than the protective threshold current flows in posistorr, it reaches its stability (as shown in figure on right) at the intersection (a) of the load curve (a) and voltage-current characteristics of posistorr(c). and posistorr works as a normal fixed resistor. however, when larger than protective threshold current flows, it stabilizes at the intersection (b) with the load curve (b). 2. protective threshold current range protective threshold current varies depending on the ambient temperature, resistance value, temperature characteristics and shape. (see figure on right) the maximum value of trip current and the minimum value of the hold current are in the range of ambient temperature -10 to +60c. that is, when a current is smaller than the hold current, posistorr works only as a fixed resistor. when larger than the trip current flows, however, posistorr protects the circuit from overload. 3. operating time a period starting from the voltage input to the moment current itself sharply attenuates is called "operating time." conventionally, operation time (t 0 ) is determined to be the period until inrush current (i 0 ) decreases to a level one half the original inrush current (i 0 /2). e r l vp i i = e - vp r l load curve in normal state (normal current) load curve in abnormal state (abnormal current) voltage-current characteristics of posistorr a b c c a b current (log) a b e voltage (log) protective threshold current range 1000 800 600 400 200 0 -20 0 20 40 60 ambient temperature (c) current (ma) protective threshold current hold current trip current operating current i 0 i 0 2 current (a) time (sec.) t 0 operating time basic characteristics of posistorr
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 7 what is the potential maximum voltage applied to posistorr? how much current flows in the circuit at normal conditions? how much current flows in the circuit at abnormal conditions? line voltage 140v usual current 200ma abnormal current 580ma part number max. voltage (v) hold current at +60c (ma) trip current at -10c (ma) max. current (a) resistance (at 25c) (ohm) thickness (t) (mm) ptgl18ar4r7m6b72b0 125 360 900 1.7 4.7 20% 5.5 ptgl18ar3r3m6b72b0 125 420 1050 2.0 3.3 20% 5.5 ptgl07ar330m6a51b0 140 100 230 0.5 33 20% 6.0 ptgl09ar220m6c61b0 140 140 330 1.0 22 20% 6.0 ptgl10ar150m6c61b0 140 170 400 1.0 15 20% 6.0 ptgl12ar100m6c01b0 140 220 510 1.0 10 20% 6.0 ptgl13ar6r8m6c01b0 140 290 670 1.0 6.8 20% 6.0 ptgl16ar5r6m6c01b0 ptgl12ar100m6c01b0 is the best selection in this case. 140 340 780 2.0 5.6 20% 6.0 body diameter (d) (mm) 18.5 18.5 7.4 9.6 11.6 13.0 14.0 17.0 o confirmation items o example o selection standards line maximum voltage v voltage of posistor r abnormal trip current of u current posistor r usual hold current v current of posistor r selection guide please confirm the parameters according to the following questions. the best selection is the product that matches three parameters.
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. application matrix 8 av equipment information equipment communications equipment car electronics home electronics household equipment power supply plasma tv lcd tv projection tv catv stb video camera digital camera dvd recorder audio electric keyboard, electronic music instrument digital mobile audio md/cd player tv game portable game laptop desktop computer server printer scanner lcd display usb access device hdd cd/dvd-rom/ram copy machine electronic dictionary/databook electronic blackboard electronic automatic exchange transmission equipment pbx cordless telephone fax machine modem cellular phone headset cellular phone base station intercom engine control ecu drive control ecu air bag anticollision radar abs/esc instrument/display panel, meter rechargeable battery for ev/hev car air conditioner hid/led headlight, afs led tail light led interior light retractable electric mirror door lock, trunk opener power seat shock absorber vics, etc burglar alarm car navigation car audio refrigerator microwave, oven electric rice-cooker ih cooking device air conditioner fan heater cleaner clothes washer, cloth dryer ventilator hot-water pot illumination device massage chair, healthcare equipment hot water spray toilet seat electric power tool switching supply inverter power ac adapter, battery charger overcurrent protection overheat sensing chip type prf chip type prg lead type ptgl lead type ptfl, ptfm o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o series application
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 9 application part number max. voltage (v) resistance (at 25 c) (ohm) body diameter (mm) thickness (mm) lead space (mm) lead diameter (mm) more details ptgl13ar100h8b72b0 ptgl12ar150h8b72b0 ptgl14ar180m9c01b0 ptgl09ar250h8b52b0 ptgl09ar390m9c61b0 ptgl07ar560m9b51a0 ptgl07ar820m9b51a0 ptgl07as121m0n51a0 ptgl07as181m0n51a0 for high wattage power supply 10 25% 14.0 6.0 7.5 0.60 page 57 15 25% 12.5 6.0 7.5 0.60 page 57 18 20% 15.7 6.5 10.0 0.65 page 57 25 25% 10.0 6.0 5.0 0.60 page 57 39 20% 10.0 6.5 6.5 0.65 page 57 56 20% 8.2 6.5 5.0 0.60 - 82 20% 8.2 6.5 5.0 0.60 - 120 20% 7.8 6.0 5.0 0.50 page 67 180 20% 7.8 6.0 5.0 0.50 page 67 for power supply of electronic fluorescent ballasts 265 280 please ask for details. posistorr is an integrated solution to work as both current limit resistor and overcurrent fuse. it works as a stable resistor in normal operation and protects itself against overcurrent situations. (1) high wattage power supply (flat display panels etc.) (2) power supply for fluorescent lights (3) other switching power supplies c inrush current limit for power supply posistorr lead type: ptgl series 1. applications (1) protection against overcurrent situations (2) automatic reset from protective trip mode (3) space-saving (4) various characteristics to meet a suitable resistance value 2. benefits choose an appropriate part number based on the resistance value required to the inrush current limit. review the maximum voltage. 3. recommended part numbers load + - load posistorr + - application notes replacement idea for a resistor and fuse solution
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 10 part number max. voltage (v) max. current (a) trip current (at -10 c) (ma) resistance (at +25 c) (ohm) body diameter (mm) thickness (mm) lead diameter (mm) more details ptgl07bb220n0b52a0 250 0.5 300 22 30% 8.0 6.0 0.6 page 56 hold current (at +60 c) (ma) 90 lead space (mm) 5.0 ptgl09ar250h8b52b0 265 1.0 330 25 25% 10.0 6.0 0.6 page 57 118 5.0 ptgl09ar390n0b52a0 250 0.6 280 39 30% 10.0 6.0 0.6 page 56 100 5.0 please ask for details. posistorr is an efficient device to protect a telephone line interface (slic: subscriber-loop-interface-circuit) against ac line contact. (1) landline telephones or fax machines (2) telephone interface of stb, voip equipment (3) any other equipment of communication facility having a phone line interface c overcurrent protection for communication facility posistorr lead type: ptgl series 1. applications (1) automatic reset from protective trip up to 265v ac line contact (2) compatible with the 600v over voltage test by ul60950 (3) high resistance to the lighting surge (*a surge absorber is still required to protect slic) 2. benefits choose an appropriate part number based on the hold current and on the resistance value required to the operation current of slic. 3. recommended part numbers slic slic posistorr ring tip ring tip application notes replacement idea for a current fuse.
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 11 part number max. voltage (v) max. current (a) hold current (at +60 c) (ma) trip current (at -10 c) (ma) resistance (at +25 c) (ohm) curie point (c) * more details prg21bc0r2mm1ra 6 10 500 2000 0.2 20% 90 page 14 prg21bc4r7mm1ra 30 5.0 100 400 4.7 20% 90 page 14 prg21bc6r8mm1ra 30 3.5 80 320 6.8 20% 90 page 14 prg21bc1r0mm1ra 12 10 220 850 1.0 20% 90 page 14 prg21bc2r2mm1ra 16 6.5 150 600 2.2 20% 90 page 14 prg21bc3r3mm1ra 20 6.0 120 480 3.3 20% 90 page 14 prg21bc0r6mm1ra 6 10 285 1100 0.6 20% 90 page 14 *curie point means the temperature at which the resistance value reaches twice the resistance at 25c. please ask for details. posistorr is an effective current limit solution based on led's allowable current and temperature characteristics. (1) led lighting instruments (2) led backlight of flat displays c current limiter for led chip posistorr: prg series 1. applications (1) higher led brightness versus a fixed resistor. led can work in the smaller series resistance with posistorr at normal operation temperature. the number of leds is possibly reduced. (2) led lifetime may be extended due to the current limiting function of the posistorr in cases of overheat or overcurrent situation. (3) small 0805 package allows the posistorr to be placed close to the led. it offers accurate detection of ambient temperature near led and increases flexibility of packaging. 2. benefits choose an appropriate part number having max. voltage and resistance value. review the protective threshold current range based on the operating current and temperature of the led. 3. recommended part numbers ic led driving circuit led current led current protected by posistorr higher brightness vs. a fixed resistor current limit by a fixed resistor allowable led working zone ambient temp. ic led current allowable led working zone ambient temp. application notes see below figures.
r90e.pdf sep.24,2012 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 12 type part number max. voltage (v) max. current (a) hold current (at +60 c) (ma) trip current (at -10 c) (ma) resistance (at +25 c) (ohm) curie point (c) * more details ptgl04as100k2n51b0 ptgl04as100k2b51b0 ptgl05as3r9k2b51b0 ptgl07as2r7k2b51b0 ptgl07as1r8k2b51b0 ptgl09as1r2k2b51b0 ptgl12as0r8k2b51b0 ptgl04as100k3b51b0 ptgl05as6r8k3b51b0 ptgl07as3r3k3b51b0 ptgl09as2r2k3b51b0 ptgl12as1r2k3b51b0 ptgl07ar220m3p51b0 ptgl07ar8r2m3p51b0 ptgl09ar150m3b51b0 ptgl10ar3r9m3p51b0 ptgl09ar4r7m3b51b0 ptgl10ar3r9m3b51b0 ptgl14ar3r3m3b71b0 smd type lead type 30 30 30 30 30 30 30 51 51 51 51 51 56 56 56 56 56 56 56 1.5 2.0 3.5 4.5 5.0 6.0 7.0 1.0 1.5 3.0 4.0 5.0 1.0 1.0 1.2 2.0 2.0 2.0 2.5 122 167 269 336 420 556 685 168 197 307 412 592 90 130 150 210 270 300 380 240 330 530 663 829 1097 1352 332 388 606 814 1168 240 350 400 550 700 800 980 10 10% 10 10% 3.9 10% 2.7 10% 1.8 10% 1.2 10% 0.8 10% 10 10% 6.8 10% 3.3 10% 2.2 10% 1.2 10% 22 20% 8.2 20% 15 20% 3.9 20% 4.7 20% 3.9 20% 3.3 20% 130 130 130 130 130 130 130 130 130 130 130 130 120 120 120 120 120 120 120 page 22 page 22 page 22 page 22 page 22 page 22 page 22 page 25 page 25 page 25 page 25 page 25 page 43 page 43 page 43 page 43 page 43 page 43 page 43 * curie point means the temperature at which the resistance value reaches twice the resistance at 25c. please ask for details. c overheat/overcurrent protection for high brightness led leaded posistorr: ptgl series & chip posistorr: prg series 1. applications 2. benefits choose an appropriate part number having max. voltage and resistance value. review the protective threshold current range based on the operating current and temperature of the led. 3. recommended part numbers a) overcurrent b) overheat resistance up !! heat up by overcurrent ! resistance up !! heat up by overheat situation ! application notes posistorr is an effective solution to protect the led against overheat and overcurrent situation. (1) led lighting instruments (appliances, automotive etc.) (1) posistor installed in series with led provides both overheat and overcurrent protection (2) no additional driver ic or software required (3) automatic reset from protective trip mode (4) 0603 and 0805 smd type available (smaller than 1/2w or 1w chip resistor) prg21bc0r2mm1ra 6 10 500 2000 0.2 20% 90 page 14 prg21bc4r7mm1ra 30 5.0 100 400 4.7 20% 90 page 14 prg21bc6r8mm1ra 30 3.5 80 320 6.8 20% 90 page 14 prg21bc1r0mm1ra 12 10 220 850 1.0 20% 90 page 14 prg21bc2r2mm1ra 16 6.5 150 600 2.2 20% 90 page 14 prg21bc3r3mm1ra 20 6.0 120 480 3.3 20% 90 page 14 prg21bc0r6mm1ra 6 10 285 1100 0.6 20% 90 page 14
posistor r for circuit protection overcurrent protection chip type overcurrent protection device with resettable function suitable for current limiting resistor. this product is a chip type ptc thermistor for overcurrent protection that is suitable for the following. countermeasure for short circuit testing current limiting resistor c features 1. rapid operation to protect the circuit in an overcurrent condition abnormality such as a short circuit. by removing the overcurrent condition, these products automatically return to the initial condition and can be used repeatedly. 2. suitable for countermeasure to short circuit test in safety standard. 3. stable resistance after operation due to ceramic ptc. 4. similar size (0603 size) is possible due to the large capacity for electric power. 5. possible to use these products as current limiting resistors with overcurrent protection functions 6. the smd type's small size and light weight are helpful in miniaturizing the circuit. l t part number lwt dimensions (mm) eg 1.60.15 0.80.15 0.80.15 0.1 to 0.6 - 2.00.2 1.250.2 0.90.2 0.2 min. 0.5 min. 2.00.2 1.250.2 1.250.2 0.2 min. 0.5 min. prg18_rb prg21_ra prg21_rk w e e g chip type 0603(1608) size part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (ma) resistance (at +25c) (ohm) prg18bb471mb1rb 24 7 10 21 25 60 470 20% prg18bb221mb1rb 24 10 14 29 35 130 220 20% prg18bb101mb1rb 24 15 21 45 55 300 100 20% prg18bb470mb1rb 24 20 29 61 75 630 47 20% prg18bb330mb1rb 24 25 36 71 85 900 33 20% prg18bc6r8mm1rb 20 80 120 260 320 3500 6.8 20% prg18bc4r7mm1rb 20 100 155 330 400 5000 4.7 20% prg18bc3r3mm1rb 16 120 180 400 480 6000 3.3 20% prg18bc2r2mm1rb 12 150 220 500 600 6500 2.2 20% prg18bc1r0mm1rb 6 220 330 740 850 7500 1.0 20% maximum current shows typical capacities of the transformer which can be used. this series is applied to re? ow soldering. this series is recognized by ul. r90e.pdf sep.24,2012 13 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 1
chip type 0805(2012) size part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (ma) resistance (at +25c) (ohm) prg21bb220mb1rk 20 30 44 91 110 1100 22 ?0% prg21bb150mb1rk 20 40 59 116 140 1600 15 ?0% prg21bc6r8mm1ra 30 80 120 260 320 5500 6.8 ?0% prg21bc4r7mm1ra 30 100 155 330 400 8000 4.7 ?0% prg21bc3r3mm1ra 20 120 180 400 480 6000 3.3 ?0% prg21bc2r2mm1ra 16 150 220 500 600 6500 2.2 ?0% prg21bc1r0mm1ra 12 220 330 740 850 10000 1.0 ?0% prg21bc0r6mm1ra 6 285 420 920 1100 10000 0.6 ?0% prg21bc0r2mm1ra 6 500 750 1620 2000 10000 0.2 ?0% maximum current shows typical capacities of the transformer which can be used. this series is applied to re ow soldering. this series is recognized by ul. a c solder resist (in mm) b land chip part number soldering methods chip (lgw) a dimensions (mm) bc 1.6g0.8 reflow soldering reflow soldering 0.6-0.8 0.6-0.7 0.6-0.8 2.0g1.25 1.0-1.2 0.5-0.7 1.0-1.2 prg18 prg21 c standard land pattern dimensions 40 30 20 10 C100 102030405060 0 ambient temperature (c) current (ma) trip current hold current protective threshold current c protective threshold current range prg18bb471mb1rb 60 40 20 C100 102030405060 0 ambient temperature (c) current (ma) trip current hold current protective threshold current prg18bb221mb1rb continued on the following page. r90e.pdf sep.24,2012 14 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ?this catalog has only typical speci cations. therefore, please approve our product speci cations or transact the approval sheet for product speci cations before ordering. 1
continued from the preceding page. 80 60 40 20 C100 102030405060 0 ambient temperature (c) current (ma) trip current hold current protective threshold current c protective threshold current range prg18bb101mb1rb 100 80 60 40 20 C100 102030405060 0 ambient temperature (c) current (ma) trip current hold current protective threshold current prg18bb470mb1rb 100 80 60 40 20 C10 0 10 20 ambient temperature (c) current (ma) 30 40 50 60 0 trip current hold current protective threshold current prg18bb330mb1rb current (ma) C10 ambient temperature (c) 01020 40 30 50 60 350 300 250 200 150 100 50 0 protective threshold current hold current trip current prg18/21bc6r8m type current (ma) C10 ambient temperature (c) 01020 40 30 50 60 450 400 350 300 250 200 150 100 50 0 protective threshold current hold current trip current prg18/21bc4r7m type C100 102030405060 0 100 200 300 400 500 600 700 ambient temperature (c) current (ma) trip current hold current protective threshold current prg18/21bc3r3m type C100 102030405060 0 100 200 300 400 500 600 700 ambient temperature (c) current (ma) trip current hold current protective threshold current prg18/21bc2r2m type C100 102030405060 0 200 400 600 800 1000 1200 ambient temperature (c) current (ma) trip current hold current protective threshold current prg18/21bc1r0m type continued on the following page. r90e.pdf sep.24,2012 15 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 1
continued from the preceding page. current (ma) C10 40 ambient temperature (c) 01020 40 30 50 60 20 60 80 100 120 140 160 0 protective threshold current range hold current trip current c protective threshold current range prg21bb220mb1rk current (ma) C10 40 ambient temperature (c) 01020 40 30 50 60 20 60 80 100 120 140 160 0 protective threshold current range hold current trip current prg21bb150mb1rk C100 102030405060 0 200 400 600 800 1000 1200 ambient temperature (c) current (ma) trip current hold current protective threshold current prg21bc0r6mm1ra current (a) C10 ambient temperature (c) 01020 40 30 50 60 0.0 0.5 1.0 1.5 2.0 2.5 3.0 protective threshold current hold current trip current prg21bc0r2mm1ra y10c w25c ambient temp. w60c overcurrent (ma) operating time (sec.) 0 20406080100 0 5 10 15 20 c operating time (typical curve) prg18bb471mb1rb y10c w25c ambient temp. w60c overcurrent (ma) operating time (sec.) 0 20406080100 0 5 10 15 20 prg18bb221mb1rb continued on the following page. r90e.pdf sep.24,2012 16 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 1
continued from the preceding page. y10c w25c ambient temp. w60c overcurrent (ma) operating time (sec.) 0 100 200 300 0 20 15 10 5 c operating time (typical curve) prg18bb101mb1rb y10c w25c ambient temp. w60c overcurrent (ma) operating time (sec.) 0 100 200 300 0 20 15 10 5 prg18bb470mb1rb y10c w25c ambient temp. w60c overcurrent (ma) operating time (sec.) 0 100 200 300 400 500 0 20 15 10 5 prg18bb330mb1rb +60c +25c ambient temp. C10c overcurrent (ma) operating time (sec.) 0 200 400 600 800 1000 10.0 8.0 6.0 4.0 2.0 0.0 prg18bc6r8mm1rb +60c +25c ambient temp. C10c overcurrent (ma) operating time (sec.) 0 200 400 600 800 1000 10.0 8.0 6.0 4.0 2.0 0.0 prg18bc4r7mm1rb +60c +25c ambient temp. C10c overcurrent (ma) operating time (sec.) 0 500 1000 1500 10.0 8.0 6.0 4.0 2.0 0.0 prg18bc3r3mm1rb continued on the following page. r90e.pdf sep.24,2012 17 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 1
continued from the preceding page. +60c +25c ambient temp. C10c overcurrent (ma) operating time (sec.) 0 500 1000 1500 10.0 8.0 6.0 4.0 2.0 0.0 c operating time (typical curve) prg18bc2r2mm1rb +60c +25c ambient temp. C10c overcurrent (ma) operating time (sec.) 0 1000 2000 3000 500 1500 2500 10.0 8.0 6.0 4.0 2.0 0.0 prg18bc1r0mm1rb y10c w25c ambient temp. w60c overcurrent (ma) operating time (sec.) 0 100 200 300 400 500 0 20 15 10 5 prg21bb220mb1rk y10c w25c ambient temp. w60c overcurrent (ma) operating time (sec.) 0 100 200 300 400 500 0 20 15 10 5 prg21bb150mb1rk w60c w25c ambient temp. y 10c overcurrent (ma) operating time (sec.) 0 200 400 600 800 1000 10 8 6 4 2 0 prg21bc6r8mm1ra w60c w25c ambient temp. y 10c overcurrent (ma) operating time (sec.) 0 200 400 600 800 1000 10 8 6 4 2 0 prg21bc4r7mm1ra continued on the following page. r90e.pdf sep.24,2012 18 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 1
continued from the preceding page. +60c +25c ambient temp. C10c overcurrent (ma) operating time (sec.) 0 500 1000 1500 10.0 8.0 6.0 4.0 2.0 0.0 c operating time (typical curve) prg21bc3r3mm1ra +60c +25c ambient temp. C10c overcurrent (ma) operating time (sec.) 0 500 1000 1500 10.0 8.0 6.0 4.0 2.0 0.0 prg21bc2r2mm1ra +60c +25c ambient temp. C10c overcurrent (ma) operating time (sec.) 0 500 1000 1500 2500 2000 3000 10.0 8.0 6.0 4.0 2.0 0.0 prg21bc1r0mm1ra +60c +25c ambient temp. C10c overcurrent (ma) operating time (sec.) 0 500 1000 1500 2500 2000 3000 10.0 8.0 6.0 4.0 2.0 0.0 prg21bc0r6mm1ra y10c w25c ambient temp. w60c overcurrent (a) operating time (sec.) 012345678910 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 prg21bc0r2mm1ra r90e.pdf sep.24,2012 19 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 1
chip type speci cations and test methods (*) measure resistance after the test by applying voltage of less than 1.5vdc by a direct current of less than 10ma after produ ct is left at 252c for 2 hours. above mentioned soldering in "4. adhesive strength" and "5. vibration" is done under the following conditions at our site. #glass-epoxy pc board #standard land dimension #standard solder paste #standard solder profile above conditions are mentioned in notice. jis c 5102 term 9.10 603c (in air), ptc is applied maximum operating voltage for 1.5 hrs. on and 0.5 hrs. off. this cycle is repeated for 100010 hrs. 10 high temperature load normal appearance resistance change: not to exceed 20% (*) jis c 5102 term 9.5 402c, 90-95%rh leave for 5004 hrs. 9 damp heat normal appearance resistance change: not to exceed 20% (*) jis c 5102 term 9.3 times: 5 cycles 8 temperature cycling normal appearance resistance change: not to exceed 20% (*) solder: sn 63%/pb 37% (or 60/40%) flux: solder paste containing less than 0.2wt% of chlorine. preheating: 1505c 3 mins. peak temp.: 2605c 105 secs. (reflow) pcb: glass epoxy pcb (jis c 6484) 7 soldering heat resistance normal appearance resistance change: not to exceed 20% (*) jis c 5102 term 8.4 solder: sn 63%/pb 37% (or 60/40%) solder temp: 2305c soaking time: 30.5 secs. soaking position: until a whole electrode is soaked 6 solderability min. 75% electrode is covered with new solder. resistance change: not to exceed 20% (*) jis c 5102 term 8.2 soldered ptc to pcb vibration: a 10-55-10hz (1 min.) width: 1.5mm vibrate for 2 hrs. in each of 3 mutually perpendicular planes for a total of 6 hrs. 5 vibration normal appearance resistance change: not to exceed 20% (*) eiaj et-7403 term 9 soldered ptc to pcb and add a force of 5.0n in the direction as shown below. 4 adhesive strength there is no sign of exfoliation on electrode. we apply 120% of the maximum operating voltage to ptc by raising gradually for 1805 secs. at 25c. (a protective resistor is to be connected in series, and the inrush current through ptc must be limited below maximum rated value.) 3 withstanding voltage without damage after applying maximum operating voltage for 3 mins. and leaving for 2 hrs. in 25c, measured by applying voltage of less than 1.5vdc (by a direct current of less than 10ma). 2 resistance value (at 25c) the resistance value should be within the specified tolerance. temperature range with maximum voltage applied to ptc. 1 operating temp. -10 to 60c step temp. (c) -20 +0, -3 room temp. +85 +3, -0 room temp. time (min.) 30 10-15 30 10-15 1 2 3 4 c prg18/21bb series no. method of examination rating value item glass epoxy pcb f=5.0n f f ptc r90e.pdf sep.24,2012 20 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 1
chip type speci cations and test methods (*) the resistance measurement after the test. after leaving for 24 hours or more in 252c, it measures by 4 wire measuring methods using the direct-current terminal current of 10ma or less (0.1 or less vdcs). above mentioned soldering in "4. adhesive strength" and "5. vibration" is done under the following conditions at our site. #glass-epoxy pc board #standard land dimension #standard solder paste #standard solder profile above conditions are mentioned in notice. 603c (in air), ptc is applied maximum operating voltage for 1.5 hrs. on and 0.5 hrs. off. this cycle is repeated for 50010 hrs. 12 high temperature load jis c 5102 term 9.3 times: 5 cycles 11 temperature cycling 602c, 90-95%rh leave for 5004 hrs. 10 damp heat -103c leave for 100012 hrs. 9 cold 603c leave for 100012 hrs. 8 dry heat normal appearance resistance change: not to exceed 20% (*) solder: sn-3ag-0.5cu flax: solder paste containing less than 0.2wt% of chlorine. preheating: 1505c 3 mins. peak temp.: 2605c 105 secs. (reflow) pcb: glass epoxy pcb (jis c 6484) 7 soldering heat resistance normal appearance resistance change: not to exceed 20% (*) jis c 5102 term 8.4 solder: sn-3ag-0.5cu solder temp: 2455c soaking time: 30.5 secs. soaking position: until a whole electrode is soaked. 6 solderability min. 75% electrode is covered with new solder. resistance change: not to exceed 20% (*) jis c 5102 term 8.2 soldered ptc to pcb vibration: a 10-55-10hz (1 min.) width: 1.5mm vibrate for 2 hrs. in each of 3 mutually perpendicular planes for a total of 6 hrs. 5 vibration normal appearance resistance change: not to exceed 20% (*) eiaj et-7403 term 9 soldered ptc to pcb and add a force of 5.0n in the direction as shown below. 4 adhesive strength there is no sign of exfoliation on electrode. we apply 120% of the maximum operating voltage to ptc by raising gradually for 1805 secs. at 25c. (a protective resistor is to be connected in series, and the inrush current through ptc must be limited below maximum rated value.) 3 withstanding voltage without damage after leaving for 24 hrs. or more in 25c, it measures by 4 wire measuring methods using the direct-current terminal current of 10ma or less (0.1 or less vdcs). 2 resistance value (at 25c) the resistance value should be within the specified tolerance. temperature range with maximum voltage applied to ptc. 1 operating temp. -10 to 60c step temp. (c) -20 +0, -3 room temp. +85 +3, -0 room temp. time (min.) 30 10-15 30 10-15 1 2 3 4 glass epoxy pcb f=5.0n f f ptc c prg18/21bc series no. method of examination rating value item r90e.pdf sep.24,2012 21 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 1
posistor r for circuit protection overcurrent protection narrow current band 30v series this product is a leaded type ptc thermistor for overcurrent protection which is suitable for a current limiting resistor. c features 1. small ? uctuation in the circuit due to resistance tolerance +/-10% 2. narrow current range (less than twice) between operating and non-operating current at -10 to 60 degrees c. 3. quick operating time due to small size compared with conventional products. 4. best suited to meet the requirements for power supplies and motor protection. error-free operations are assured by rush current. 5. circuit is protected until current is turned off. 6. restores the original low resistance value automatically once the overload is removed. 7. non-contact design leads to long life and no noise. durable and strong against mechanical vibration and shock because it is a solid element. f1.5 ?d0.05 d max. t max. h max. 4.01.5 (in mm) part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (a) resistance (at +25c) (ohm) body diameter (d) (mm) thickness (t) (mm) height (h) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl04as100k2n51b0 30 122 154 205 240 1.5 10 10% 4.5 3.5 9.5 5.0 0.5 ptgl04as100k2b51b0 30 167 212 282 330 2.0 10 10% 4.5 3.5 9.5 5.0 0.6 ptgl05as3r9k2b51b0 30 269 340 452 530 3.5 3.9 10% 5.5 3.5 10.5 5.0 0.6 ptgl07as2r7k2b51b0 30 336 425 565 663 4.5 2.7 10% 7.3 3.5 12.3 5.0 0.6 ptgl07as1r8k2b51b0 30 420 532 708 829 5.0 1.8 10% 7.3 3.5 12.3 5.0 0.6 ptgl09as1r2k2b51b0 30 556 704 936 1097 6.0 1.2 10% 9.3 3.5 14.3 5.0 0.6 ptgl12as0r8k2b51b0 30 685 867 1153 1352 7.0 0.8 10% 11.5 3.5 16.5 5.0 0.6 maximum current shows typical capacities of the transformer which can be used. 30v series is recognized by ul. taping type is also available. please refer to the page of "package" information for details. 0 40 80 120 160 200 240 280 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current c protective threshold current range ptgl04as100k2n51b0 0 100 200 300 400 current (ma) -20 0 20 40 60 80 ambient temperature (c) trip current hold current current protective threshold ptgl04as100k2b51b0 continued on the following page. r90e.pdf sep.24,2012 22 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 2
continued from the preceding page. 0 100 200 300 400 500 600 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current c protective threshold current range ptgl05as3r9k2b51b0 0 100 200 300 400 500 600 700 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl07as2r7k2b51b0 0 200 400 600 800 1000 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl07as1r8k2b51b0 0 200 400 600 800 1000 1200 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl09as1r2k2b51b0 0 400 800 1200 1600 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl12as0r8k2b51b0 0.01 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. c operating time (typical curve) ptgl04as100k2n51b0 0.01 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl04as100k2b51b0 continued on the following page. r90e.pdf sep.24,2012 23 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 2
continued from the preceding page. 0.01 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. c operating time (typical curve) ptgl05as3r9k2b51b0 0.01 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl07as2r7k2b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl07as1r8k2b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl09as1r2k2b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) ambient temp. - 30c - 10c 25c 60c 85c ptgl12as0r8k2b51b0 r90e.pdf sep.24,2012 24 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 2
posistor r for circuit protection overcurrent protection narrow current band 51/60v series this product is a leaded type ptc thermistor for overcurrent protection which is suitable for a current limiting resistor. c features 1. small ? uctuation in the circuit due to resistance tolerance +/-10% 2. narrow current range (less than twice) between operating and non-operating current at -10 to 60 degrees c. 3. quick operating time due to small size compared with conventional products. 4. best suited to meet the requirements for power supplies and motor protection. error-free operations are assured by rush current. 5. circuit is protected until current is turned off. 6. restores the original low resistance value automatically once the overload is removed. 7. non-contact design leads to long life and no noise. durable and strong against mechanical vibration and shock because it is a solid element. f1.5 ?d0.05 d max. t max. h max. 4.01.5 (in mm) part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (a) resistance (at +25c) (ohm) body diameter (d) (mm) thickness (t) (mm) height (h) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl04as100k3b51b0 51 168 213 283 332 1.0 10 10% 4.5 3.5 9.5 5.0 0.6 ptgl05as6r8k3b51b0 51 197 249 331 388 1.5 6.8 10% 5.5 3.5 10.5 5.0 0.6 ptgl07as3r3k3b51b0 51 307 389 517 606 3.0 3.3 10% 7.3 3.5 12.3 5.0 0.6 ptgl09as2r2k3b51b0 51 412 522 694 814 4.0 2.2 10% 9.3 3.5 14.3 5.0 0.6 ptgl12as1r2k3b51b0 51 592 749 996 1168 5.0 1.2 10% 11.5 3.5 16.5 5.0 0.6 ptgl04as220k4n51b0 60 88 112 149 175 1.0 22 10% 4.5 3.5 9.5 5.0 0.5 ptgl04as220k4b51b0 60 115 145 193 226 1.0 22 10% 4.5 3.5 9.5 5.0 0.6 ptgl05as100k4b51b0 60 170 215 286 335 1.5 10 10% 5.5 3.5 10.5 5.0 0.6 ptgl07as5r6k4n51b0 60 186 236 314 368 2.2 5.6 10% 7.3 3.5 12.3 5.0 0.5 ptgl07as5r6k4b51b0 60 229 290 386 452 3.0 5.6 10% 7.3 3.5 12.3 5.0 0.6 ptgl09as3r3k4b51b0 60 333 421 560 656 4.0 3.3 10% 9.3 3.5 14.3 5.0 0.6 ptgl12as2r2k4b51b0 60 439 556 739 867 5.0 2.2 10% 11.5 3.5 16.5 5.0 0.6 maximum current shows typical capacities of the transformer which can be used. 51/60v series are recognized by ul. taping type is also available. please refer to the page of "package" information for details. r90e.pdf sep.24,2012 25 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 3
0 100 200 300 400 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current c protective threshold current range (51v series) ptgl04as100k3b51b0 0 100 200 300 400 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl05as6r8k3b51b0 0 100 200 300 400 500 600 700 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl07as3r3k3b51b0 0 200 400 600 800 1000 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl09as2r2k3b51b0 0 200 400 600 800 1000 1200 1400 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl12as1r2k3b51b0 0 40 80 120 160 200 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current c protective threshold current range (60v series) ptgl04as220k4n51b0 0 40 80 120 160 200 240 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl04as220k4b51b0 continued on the following page. r90e.pdf sep.24,2012 26 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 3
continued from the preceding page. 0 100 200 300 400 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current c protective threshold current range (60v series) ptgl05as100k4b51b0 0 100 200 300 400 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl07as5r6k4n51b0 0 100 200 300 400 500 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl07as5r6k4b51b0 0 100 200 300 400 500 600 700 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl09as3r3k4b51b0 0 200 400 600 800 1000 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl12as2r2k4b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. c operating time 51v series (typical curve) ptgl04as100k3b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl05as6r8k3b51b0 continued on the following page. r90e.pdf sep.24,2012 27 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 3
continued from the preceding page. 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. c operating time 51v series (typical curve) ptgl07as3r3k3b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl09as2r2k3b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) ambient temp. - 30c - 10c 25c 60c 85c ptgl12as1r2k3b51b0 0.01 0.1 1 10 100 0.01 0.1 1 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. c operating time 60v series (typical curve) ptgl04as220k4n51b0 0.01 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl04as220k4b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl05as100k4b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl07as5r6k4n51b0 continued on the following page. r90e.pdf sep.24,2012 28 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 3
continued from the preceding page. 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. c operating time 60v series (typical curve) ptgl07as5r6k4b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl09as3r3k4b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl12as2r2k4b51b0 r90e.pdf sep.24,2012 29 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 3
posistor r for circuit protection overcurrent protection narrow current band 140v series this product is a leaded type ptc thermistor for overcurrent protection which is suitable for a current limiting resistor. c features 1. small ? uctuation in the circuit due to resistance tolerance +/-10% 2. narrow current range (less than twice) between operating and non-operating current at -10 to 60 degrees c. 3. quick operating time due to small size compared with conventional products. 4. best suited to meet the requirements for power supplies and motor protection. error-free operations are assured by rush current. 5. circuit is protected until current is turned off. 6. restores the original low resistance value automatically once the overload is removed. 7. non-contact design leads to long life and no noise. durable and strong against mechanical vibration and shock because it is a solid element. f1.5 ?d0.05 d max. t max. h max. 4.01.5 (in mm) part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (a) resistance (at +25c) (ohm) body diameter (d) (mm) thickness (t) (mm) height (h) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl04as560k6b51b0 140 74 94 125 147 0.5 56 10% 4.5 4.5 9.5 5.0 0.6 ptgl05as270k6b51b0 140 106 134 178 209 1.0 27 10% 5.5 4.5 10.5 5.0 0.6 ptgl07as150k6b51b0 140 148 187 249 292 1.5 15 10% 7.3 4.5 12.3 5.0 0.6 ptgl09as120k6b51b0 140 192 244 324 380 2.0 12 10% 9.3 4.5 14.3 5.0 0.6 ptgl09as7r6k6b51b0 140 227 287 382 447 2.2 7.6 10% 9.3 4.5 14.3 5.0 0.6 ptgl12as4r7k6b51b0 140 310 393 523 613 3.5 4.7 10% 11.5 4.5 16.5 5.0 0.6 maximum current shows typical capacities of the transformer which can be used. 140v series is recognized by ul. taping type is also available. please refer to the page of "package" information for details. 0 40 80 120 160 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current c protective threshold current range ptgl04as560k6b51b0 0 40 80 120 160 200 240 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl05as270k6b51b0 continued on the following page. r90e.pdf sep.24,2012 30 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 4
continued from the preceding page. 0 100 200 300 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current protective threshold current hold current c protective threshold current range ptgl07as150k6b51b0 0 100 200 300 400 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl09as120k6b51b0 0 100 200 300 400 500 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl09as7r6k6b51b0 0 100 200 300 400 500 600 700 -20 0 20 40 60 80 ambient temperature (c) current (ma) trip current hold current protective threshold current ptgl12as4r7k6b51b0 0.1 1 10 100 0.01 0.1 1 overcurrent (a) operating time (sec.) ambient temp. - 30c - 10c 25c 60c 85c c operating time (typical curve) ptgl04as560k6b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl05as270k6b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c ambient temp. 85c ptgl07as150k6b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) ambient temp. - 30c - 10c 25c 60c 85c ptgl09as120k6b51b0 continued on the following page. r90e.pdf sep.24,2012 31 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 4
continued from the preceding page. 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. c operating time (typical curve) ptgl09as7r6k6b51b0 0.1 1 10 100 0.1 1 10 overcurrent (a) operating time (sec.) - 30c - 10c 25c 60c 85c ambient temp. ptgl12as4r7k6b51b0 r90e.pdf sep.24,2012 32 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 4
posistor r for circuit protection overcurrent protection 16v series this low-voltage, low-resistance type "posistor" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like motor lock or short circuit, will be increased to restrain overcurrent. this "posistor" is most suitable for low-voltage circuits. c features 1. best suited to meet the requirements for power supplies and motor protection. error-free operation is assured by rush current. 2. circuit is protected until current is turned off. 3. restores the original low resistance value automatically once the overload is removed. 4. non-contact design leads to long life and no noise. durable and strong against mechanical vibration and shock because it is a solid element. f1.5 ?d0.05 d max. t max. h max. 4.01.5 (in mm) part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (a) resistance (at +25c) (ohm) body diameter (d) (mm) thickness (t) (mm) height (h) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl05ar1r0m1b51b0 16 370 470 880 1040 2.0 1.0 20% 6.0 3.5 9.5 5.0 0.6 ptgl06ar0r8m1b51b0 16 400 505 955 1120 3.0 0.8 20% 6.5 3.5 10.0 5.0 0.6 ptgl07arr47m1b51b0 16 560 705 1310 1570 5.0 0.47 20% 7.5 3.5 12.0 5.0 0.6 ptgl09arr33m1b51b0 16 680 875 1625 1900 7.0 0.33 20% 9.0 3.5 14.0 5.0 0.6 ptgl10arr27m1b51b0 16 800 1025 1900 2250 8.0 0.27 20% 10.1 3.5 15.0 5.0 0.6 ptgl12ar0r2m1b51b0 16 1000 1300 2410 2800 9.0 0.2 20% 11.3 3.5 16.0 5.0 0.6 ptgl14arr15m1b51b0 16 1200 1545 2855 3360 10 0.15 20% 13.5 3.5 18.5 5.0 0.6 maximum current shows typical capacities of the transformer which can be used. taping type is also available(except ptgl14arr15m1b51b0). please refer to the page of "package" information for details. 1400 1200 1000 800 600 400 200 0 ambient temperature (c) current (ma) -20-10 0 1020304050607080 trip current hold current protective threshold current c protective threshold current range (16v series) ptgl05ar1r0m1b51b0 1400 1200 1000 800 600 400 200 0 ambient temperature (c) current (ma) -20-10 0 1020304050607080 trip current hold current protective threshold current ptgl06ar0r8m1b51b0 continued on the following page. r90e.pdf sep.24,2012 33 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 5
continued from the preceding page. 2000 1800 1600 1400 1200 1000 800 600 400 200 0 ambient temperature (c) current (ma) -20-10 0 1020304050607080 protective threshold current trip current hold current c protective threshold current range (16v series) ptgl07arr47m1b51b0 2600 2400 2200 2000 1800 1600 1400 1200 1000 800 600 400 200 0 ambient temperature (c) current (ma) -20-10 0 1020304050607080 trip current hold current protective threshold current ptgl09arr33m1b51b0 3000 2800 2600 2400 2200 2000 1800 1600 1400 1200 1000 800 600 400 200 0 ambient temperature (c) current (ma) -20-10 0 1020304050607080 trip current hold current protective threshold current ptgl10arr27m1b51b0 4000 3500 3000 2500 2000 1500 1000 500 0 ambient temperature (c) current (ma) -20-10 0 1020304050607080 trip current hold current protective threshold current ptgl12ar0r2m1b51b0 4000 3500 3000 2500 2000 1500 1000 500 0 ambient temperature (c) current (ma) -20-10 0 1020304050607080 trip current hold current protective threshold current ptgl14arr15m1b51b0 100.0 10.0 1.0 0.1 0.1 1 10 100 overcurrent (a) operating time (sec.) -10c +25c +60c ambient temp. c operating time 16v series (typical curve) ptgl05ar1r0m1b51b0 100.0 10.0 1.0 0.1 0.1 1 10 100 overcurrent (a) operating time (sec.) -10c +25c +60c ambient temp. ptgl06ar0r8m1b51b0 continued on the following page. r90e.pdf sep.24,2012 34 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 5
continued from the preceding page. 100.0 10.0 1.0 0.1 0.1 1 10 100 overcurrent (a) operating time (sec.) -10c +25c +60c ambient temp. c operating time 16v series (typical curve) ptgl07arr47m1b51b0 100.0 10.0 1.0 0.1 0.1 1 10 100 overcurrent (a) operating time (sec.) -10c +25c +60c ambient temp. ptgl09arr33m1b51b0 100.0 10.0 1.0 0.1 0.1 1 10 100 overcurrent (a) operating time (sec.) -10c +25c +60c ambient temp. ptgl10arr27m1b51b0 100.0 10.0 1.0 0.1 0.1 1 10 100 overcurrent (a) operating time (sec.) -10c +25c +60c ambient temp. ptgl12ar0r2m1b51b0 100.0 10.0 1.0 0.1 0.1 1 10 100 overcurrent (a) operating time (sec.) -10c +25c +60c ambient temp. ptgl14arr15m1b51b0 r90e.pdf sep.24,2012 35 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 5
posistor r for circuit protection overcurrent protection 24/30/32v series the safety resistor "posistor" is most suited to meet the requirements of the safety standard short-circuit tests such as iec, vde, bs, ul, csa, etc., worldwide. c features 1. best suited to meet the requirements of the short- circuit test. quick response compared with current fuse and resistor and error-free operation are assured. 2. small size save board space. capable of being mounted anywhere because replacement is not required. 3. actuates by excessive current during the short- circuit test to restrain abnormal heat generation in other circuit components and printed boards. this state will be maintained until the abnormal state is removed or power is turned off to reset the "posistor" to the original state. surface temperature of "posistor" is kept low, below a certain value, during the actuation. 4. non-contact design leads to long life and no noise. durable and strong against mechanical vibration and shock because it is a solid element. d max. 4.01.5 6.0 max. f1.5 (in mm) t max. ?d 0.05 part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (a) resistance (at +25c) (ohm) body diameter (d) (mm) thickness (t) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl07bd100n2b51b0 24 80 124 251 320 2.0 10 30% 7.4 4.0 5.0 0.6 ptgl07bd6r8n2b51b0 24 90 139 296 370 2.0 6.8 30% 7.4 4.0 5.0 0.6 ptgl09bd4r7n2b51b0 24 120 216 398 500 2.0 4.7 30% 9.5 4.0 5.0 0.6 ptgl09bd3r3n2b51b0 24 140 248 461 580 2.0 3.3 30% 9.5 4.0 5.0 0.6 ptgl09bd2r2n2b51b0 24 180 326 431 710 2.0 2.2 30% 9.5 4.0 5.0 0.6 ptgl04ar130h2b51b0 30 145 180 350 400 0.7 13 25% 5.5 4.0 5.0 0.6 ptgl07ar4r6h2b51b0 30 250 340 610 700 2.0 4.6 25% 7.4 4.0 5.0 0.6 ptgl09ar1r8h2b51b0 30 410 510 970 1120 3.0 1.8 25% 9.5 4.0 5.0 0.6 ptgl12ar1r2h2b51b0 30 520 645 1225 1420 4.3 1.2 25% 12.0 4.0 5.0 0.6 ptgl13ar0r8h2b71b0 30 680 870 1600 1900 5.5 0.8 25% 13.5 4.0 7.5 0.6 ptgl07bd470n3b51b0 32 30 55 115 140 1.5 47 30% 7.4 4.0 5.0 0.6 ptgl07bd330n3b51b0 32 40 60 135 170 1.5 33 30% 7.4 4.0 5.0 0.6 ptgl07bd220n3b51b0 32 45 75 160 200 1.5 22 30% 7.4 4.0 5.0 0.6 ptgl07bd150n3b51b0 32 60 100 195 240 1.5 15 30% 7.4 4.0 5.0 0.6 maximum current shows typical capacities of the transformer which can be used. 24/30/32v series are recognized by ul (except ptgl13ar0r8h2b71b0). only ptgl_51b0 series are available in taping type (except ptgl12ar1r2h2b51b0). please refer to the page of "package" information for details. r90e.pdf sep.24,2012 36 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 6
current (ma) 200 20 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current c protective threshold current range (24v series) ptgl07bd100n2b51b0 current (ma) 200 20 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl07bd6r8n2b51b0 current (ma) 200 20 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl09bd4r7n2b51b0 current (ma) 200 20 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl09bd3r3n2b51b0 current (ma) 500 20 1000 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 1500 ptgl09bd2r2n2b51b0 current (ma) 200 20 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 600 c protective threshold current range (30v series) ptgl04ar130h2b51b0 current (ma) 20 800 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 200 ptgl07ar4r6h2b51b0 continued on the following page. r90e.pdf sep.24,2012 37 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 6
continued from the preceding page. current (ma) 500 20 1000 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 1500 c protective threshold current range (30v series) ptgl09ar1r8h2b51b0 current (ma) 500 20 1000 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 1500 ptgl12ar1r2h2b51b0 current (ma) 500 20 2000 1500 1000 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl13ar0r8h2b71b0 current (ma) 100 20 300 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current c protective threshold current range (32v series) ptgl07bd470n3b51b0 current (ma) 100 20 300 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl07bd330n3b51b0 current (ma) 100 20 300 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl07bd220n3b51b0 current (ma) 100 20 300 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl07bd150n3b51b0 r90e.pdf sep.24,2012 38 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 6
operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 2.0 c operating time 24v series (typical curve) ptgl07bd100n2b51b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 2.0 ptgl07bd6r8n2b51b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 2.0 ptgl09bd4r7n2b51b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 2.0 30 ptgl09bd3r3n2b51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 2.0 ptgl09bd2r2n2b51b0 r90e.pdf sep.24,2012 39 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 6
operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 0.2 0.6 ambient temp. 0.4 C10c 25c 60c c operating time 30v series (typical curve) ptgl04ar130h2b51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.2 0.4 0.6 0.8 1.0 ptgl07ar4r6h2b51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 ptgl09ar1r8h2b51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 4.0 ptgl12ar1r2h2b51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 4.0 5.0 ptgl13ar0r8h2b71b0 r90e.pdf sep.24,2012 40 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 6
operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 c operating time 32v series (typical curve) ptgl07bd470n3b51b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 ptgl07bd330n3b51b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 ptgl07bd220n3b51b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 ptgl07bd150n3b51b0 ac 100v pth short r 3 b r 4 r 1 r 2 + C c e c application circuit (1) short - circuit test of transistor ac 100v short pth r 1 (2) short - circuit test of diode continued on the following page. r90e.pdf sep.24,2012 41 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 6
continued from the preceding page. pth short +v 0 ic c application circuit (3) short - circuit test of ic ac 100v pth short electrolytic capacitor + C (4) short - circuit test of electrolytic capacitor pth motor (lock) dc24v m (5) lock test of motor r l r a r e r b c pth (6) transistor protection circuit power supply pth (7) transformer protection circuit r90e.pdf sep.24,2012 42 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 6
posistor r for circuit protection overcurrent protection 56/80v series "posistor" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like overcurrent or overheating, will be increased to restrain overcurrent. "posistor" can be used for overcurrent protection against current fuse or temperature fuse, due to its ability to return to its initial condition when overcurrent is removed. c features 1. best suited to meet the requirements for power supplies and motor protection. error-free operations are assured by rush current. 2. circuit is protected until current is turned off. 3. restores the original low resistance value automatically once the overload is removed. 4. non-contact design leads to long life and no noise. durable and strong against mechanical vibration and shock because it is a solid element. c applications 1. dc cooling fan motors in of? ce equipment, e.g., computers, facsimiles, ? oppy disk drives and power units. 2. dc drive motors in vtrs and cassette tape recorders. power transformers (at secondary winding) f1.5 ?d0.05 d max. t max. 6.0 max. 4.01.5 (in mm) part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (a) resistance (at +25c) (ohm) body diameter (d) (mm) thickness (t) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl07ar220m3p51b0 56 90 115 205 240 1.0 22 20% 7.4 4.0 5.0 0.6 ptgl07ar8r2m3p51b0 56 130 165 300 350 1.0 8.2 20% 7.4 4.0 5.0 0.6 ptgl09ar150m3b51b0 56 150 190 340 400 1.2 15 20% 9.5 4.0 5.0 0.6 ptgl10ar3r9m3p51b0 56 210 260 470 550 2.0 3.9 20% 10.5 4.0 5.0 0.6 ptgl09ar4r7m3b51b0 56 270 350 600 700 2.0 4.7 20% 9.5 4.0 5.0 0.6 ptgl10ar3r9m3b51b0 56 300 390 680 800 2.0 3.9 20% 10.5 4.0 5.0 0.6 ptgl14ar3r3m3b71b0 56 380 490 830 980 2.5 3.3 20% 14.5 4.0 7.5 0.6 ptgl05ar550h4p51b0 80 50 62 115 135 0.7 55 25% 5.5 4.5 5.0 0.6 ptgl07ar250h4b51b0 80 110 140 260 300 1.0 25 25% 7.4 4.5 5.0 0.6 ptgl09ar9r4h4b51b0 80 190 240 450 530 3.0 9.4 25% 9.5 4.5 5.0 0.6 ptgl12ar5r6h4b71b0 80 270 350 650 760 4.3 5.6 25% 12.0 4.5 7.5 0.6 ptgl13ar3r7h4b71b0 80 310 405 750 860 5.5 3.7 25% 13.5 4.5 7.5 0.6 maximum current shows typical capacities of the transformer which can be used. please contact us for ul recognized products. only ptgl_51b0 type is available in taping type. please refer to the page of "package" information for details. r90e.pdf sep.24,2012 43 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 7
current (ma) C20 100 ambient temperature (c) 0 2 04 06 08 0 200 300 0 trip current hold current protective threshold current c protective threshold current range (56v series) ptgl07ar220m3p51b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 100 200 300 400 500 ptgl07ar8r2m3p51b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 100 200 300 400 500 ptgl09ar150m3b51b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 800 600 400 200 ptgl10ar3r9m3p51b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 800 600 400 200 ptgl09ar4r7m3b51b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 1000 800 600 400 200 ptgl10ar3r9m3b51b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 1500 1000 500 ptgl14ar3r3m3b71b0 r90e.pdf sep.24,2012 44 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 7
current (ma) 50 20 100 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 150 c protective threshold current range (80v series) ptgl05ar550h4p51b0 current (ma) 100 20 400 300 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl07ar250h4b51b0 current (ma) 200 20 800 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl09ar9r4h4b51b0 current (ma) 200 20 800 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl12ar5r6h4b71b0 current (ma) 500 20 1000 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 1500 ptgl13ar3r7h4b71b0 r90e.pdf sep.24,2012 45 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 7
operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.2 0.4 0.6 0.8 c operating time 56v series (typical curve) ptgl07ar220m3p51b0 operating time (sec.) 0 overcurrent (a) 0 C10c 25c ambient temp. 60c 10 20 30 40 50 0.5 1.0 1.5 2.0 ptgl07ar8r2m3p51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c 60c ambient temp. 0.2 0.4 0.6 0.8 ptgl09ar150m3b51b0 operating time (sec.) 0 overcurrent (a) 0 C10c 25c ambient temp. 60c 5 10 15 20 25 1234 ptgl10ar3r9m3p51b0 operating time (sec.) 0 overcurrent (a) 0 C10c 25c ambient temp. 60c 5 10 15 20 25 1234 ptgl09ar4r7m3b51b0 operating time (sec.) 0 overcurrent (a) 0 C10c 25c ambient temp. 60c 5 10 15 20 25 1234 ptgl10ar3r9m3b51b0 continued on the following page. r90e.pdf sep.24,2012 46 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 7
continued from the preceding page. operating time (sec.) 0 overcurrent (a) 40 30 20 10 0 1234 C10c 25c 60c ambient temp. c operating time 56v series (typical curve) ptgl14ar3r3m3b71b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c 60c 0.2 0.6 ambient temp. 0.4 c operating time 80v series (typical curve) ptgl05ar550h4p51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.2 0.4 0.6 0.8 1.0 ptgl07ar250h4b51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 ptgl09ar9r4h4b51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 4.0 ptgl12ar5r6h4b71b0 continued on the following page. r90e.pdf sep.24,2012 47 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 7
continued from the preceding page. operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 4.0 5.0 c operating time 80v series (typical curve) ptgl13ar3r7h4b71b0 motor power supply m pth c application circuit (1) dc motor protection circuit r l r a r e r b c pth (2) transistor protection circuit power supply pth (3) transformer protection circuit r90e.pdf sep.24,2012 48 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 7
posistor r for circuit protection overcurrent protection 125/140v series "posistor" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like overcurrent or overheating, will be increased to restrain overcurrent. "posistor" can be used for overcurrent protection against current fuse or temperature fuse, due to its ability to return to its initial condition when overcurrent is removed. c features 1. best suited to meet the requirements for power supplies and motor protection. error-free operations are assured by rush current. 2. circuit is protected until current is turned off. 3. restores the original low resistance value automatically once the overload is removed. 4. non-contact design leads to long life and no noise. durable and strong against mechanical vibration and shock because it is a solid element. c applications circuit protection : 1. transformers 2. transistors 3. fluorescent lamps f1.5 ?d0.05 d max. t max. 6.0 max. 4.01.5 (in mm) 125v series d max. 4.01.5 6.0 max. f1.5 (in mm) t max. ?d 0.05 140v series part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (a) resistance (at +25c) (ohm) body diameter (d) (mm) thickness (t) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl05ar181m7p52b0 125 30 38 64 75 0.3 180 20% 6.0 5.0 5.0 0.6 ptgl07ar750m7b52b0 125 65 82 142 165 0.3 75 20% 8.0 6.0 5.0 0.6 ptgl09ar470m6b52b0 125 90 120 200 230 0.5 47 20% 10.0 5.5 5.0 0.6 ptgl09ar220m6b52b0 125 135 175 290 340 0.8 22 20% 10.0 5.5 5.0 0.6 ptgl12ar150m6b72b0 125 175 220 380 440 1.0 15 20% 12.5 5.5 7.5 0.6 ptgl14ar100m6b72b0 125 220 280 475 550 1.2 10 20% 15.0 5.5 7.5 0.6 ptgl18ar6r8m6b72b0 125 300 380 640 750 1.4 6.8 20% 18.5 5.5 7.5 0.6 ptgl18ar4r7m6b72b0 125 360 450 775 900 1.7 4.7 20% 18.5 5.5 7.5 0.6 ptgl18ar3r3m6b72b0 125 420 540 900 1050 2.0 3.3 20% 18.5 5.5 7.5 0.6 ptgl07ar330m6a51b0 140 100 130 200 230 0.5 33 20% 7.4 6.0 5.0 0.5 ptgl09ar220m6c61b0 140 140 180 280 330 1.0 22 20% 9.6 6.0 6.5 0.65 ptgl10ar150m6c61b0 140 170 220 345 400 1.0 15 20% 11.6 6.0 6.5 0.65 ptgl12ar100m6c01b0 140 220 290 440 510 1.0 10 20% 13.0 6.0 10.0 0.65 ptgl13ar6r8m6c01b0 140 290 370 575 670 1.0 6.8 20% 14.0 6.0 10.0 0.65 ptgl16ar5r6m6c01b0 140 340 440 670 780 2.0 5.6 20% 17.0 6.0 10.0 0.65 maximum current shows typical capacities of the transformer which can be used. please contact us for ul recognized products. only ptgl_52b0 type is available in taping type. please refer to the page of "package" information for details. r90e.pdf sep.24,2012 49 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 8
current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 100 80 60 40 20 c protective threshold current range (125v series) ptgl05ar181m7p52b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 200 150 100 50 ptgl07ar750m7b52b0 current (ma) C20 100 ambient temperature (c) 0 20406080 200 300 0 trip current hold current protective threshold current ptgl09ar470m6b52b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 100 200 300 400 500 ptgl09ar220m6b52b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 100 200 300 400 500 ptgl12ar150m6b72b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 800 600 400 200 ptgl14ar100m6b72b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 1000 800 600 400 200 ptgl18ar6r8m6b72b0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 1000 800 600 400 200 ptgl18ar4r7m6b72b0 continued on the following page. r90e.pdf sep.24,2012 50 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 8
continued from the preceding page. current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 1200 1000 800 600 400 200 c protective threshold current range (125v series) ptgl18ar3r3m6b72b0 current (ma) 100 20 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 300 80 c protective threshold current range (140v series) ptgl07ar330m6a51b0 current (ma) 200 20 800 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 ptgl09ar220m6c61b0 current (ma) 200 20 800 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 ptgl10ar150m6c61b0 current (ma) 200 20 800 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 ptgl12ar100m6c01b0 current (ma) 200 20 800 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 ptgl13ar6r8m6c01b0 current (ma) 200 20 800 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 ptgl16ar5r6m6c01b0 r90e.pdf sep.24,2012 51 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 8
operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.1 0.2 0.3 c operating time 125v series (typical curve) ptgl05ar181m7p52b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 0.1 0.2 0.3 0.4 C10c 25c 60c ambient temp. ptgl07ar750m7b52b0 operating time (sec.) 0 overcurrent (a) 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 200 400 600 800 ptgl09ar470m6b52b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 0.2 0.4 0.6 0.8 C10c 25c 60c ambient temp. ptgl09ar220m6b52b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 0.5 1.0 1.5 C10c 25c 60c ambient temp. ptgl12ar150m6b72b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 0.5 1.0 1.5 C10c 25c 60c ambient temp. ptgl14ar100m6b72b0 continued on the following page. r90e.pdf sep.24,2012 52 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 8
continued from the preceding page. operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 2.0 2.5 c operating time 125v series (typical curve) ptgl18ar6r8m6b72b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 4.0 5.0 ptgl18ar4r7m6b72b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 4.0 5.0 ptgl18ar3r3m6b72b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.25 0.50 0.75 c operating time 140v series (typical curve) ptgl07ar330m6a51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 ptgl09ar220m6c61b0 continued on the following page. r90e.pdf sep.24,2012 53 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 8
continued from the preceding page. operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 0.5 1.0 1.5 C10c 25c ambient temp. 60c c operating time 140v series (typical curve) ptgl10ar150m6c61b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 ptgl12ar100m6c01b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 0.5 1.0 1.5 C10c 25c 60c ambient temp. ptgl13ar6r8m6c01b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 ptgl16ar5r6m6c01b0 r90e.pdf sep.24,2012 54 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 8
power supply d c pth c application circuit (1) transformer protection circuit 1) power supply pth (2) transformer protection circuit 2) r l r a r e r b c pth (3) transistor protection circuit power source fluorescent lamp ss r c c ch c pth (4) fluorescent lamp protection circuit r90e.pdf sep.24,2012 55 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 8
posistor r for circuit protection overcurrent protection 250/265v series "posistor" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like overcurrent or overheating, will be increased to restrain overcurrent. "posistor" can be used for overcurrent protection against current fuse or temperature fuse, due to its ability to return to its initial condition when overcurrent is removed. c features 1. best suited to meet the requirements for power supplies and motor protection. error-free operations are assured by rush current. 2. circuit is protected until current is turned off. 3. restores the original low resistance value automatically once the overload is removed. 4. non-contact design leads to long life and no noise. durable and strong against mechanical vibration and shock because it is a solid element. ?d0.05 d max. f t max. +0.8 C0.3 (in mm) 250v series d max. 4.01.5 6.0 max. f1.5 (in mm) t max. ?d 0.05 265v series (ptgl_1b0) f1.5 ?d0.05 d max. t max. 6.0 max. 4.01.5 (in mm) 265v series (ptgl_2b0) part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (a) resistance (at +25c) (ohm) body diameter (d) (mm) thickness (t) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl07bb220n0b52a0 250 90 130 250 300 0.5 22 30% 8.0 6.0 5.0 0.6 ptgl10bb120n0p52a0 250 90 130 250 300 0.6 12 30% 11.0 6.0 5.0 0.6 ptgl09ar390n0b52a0 250 100 115 245 280 0.6 39 30% 10.0 6.0 5.0 0.6 ptgl05ar151h8p52b0 265 28 35 65 78 0.2 150 25% 6.0 6.0 5.0 0.6 ptgl05ar181m9n51b0 265 29 37 60 70 0.3 180 20% 6.5 6.5 5.0 0.5 ptgl05ar121m9n51b0 265 35 47 75 85 0.3 120 20% 6.5 6.5 5.0 0.5 ptgl07ar820m9a51b0 265 60 75 125 150 0.5 82 20% 8.2 6.5 5.0 0.5 ptgl07ar700h8b52b0 265 66 85 160 185 0.4 70 25% 8.0 6.0 5.0 0.6 ptgl07ar650h8b52b0 265 68 84 162 190 1.0 65 25% 8.0 6.0 5.0 0.6 ptgl07ar450h8b52b0 265 80 105 200 220 1.0 45 25% 8.0 6.0 5.0 0.6 ptgl07ar560m9a51b0 265 80 95 165 190 0.8 56 20% 8.2 6.5 5.0 0.5 continued on the following page. r90e.pdf sep.24,2012 56 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 9
continued from the preceding page. part number max. voltage (v) hold current (at +60c) (ma) hold current (at +25c) (ma) trip current (at +25c) (ma) trip current (at -10c) (ma) max. current (a) resistance (at +25c) (ohm) body diameter (d) (mm) thickness (t) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl09ar390m9c61b0 265 100 130 210 240 1.2 39 20% 10.0 6.5 6.5 0.65 ptgl09ar250h8b52b0 265 118 150 290 330 1.0 25 25% 10.0 6.0 5.0 0.6 ptgl12ar270m9c01b0 265 150 200 310 360 1.5 27 20% 14.0 6.5 10.0 0.65 ptgl12ar150h8b72b0 265 165 210 400 460 1.5 15 25% 12.5 6.0 7.5 0.6 ptgl14ar180m9c01b0 265 180 230 380 440 1.8 18 20% 15.7 6.5 10.0 0.65 ptgl13ar100h8b72b0 265 200 260 480 560 2.2 10 25% 14.0 6.0 7.5 0.6 ptgl18ar6r0h8b72b0 265 300 380 715 830 4.1 6.0 25% 18.5 6.0 7.5 0.6 C200 204060 ambient temperature (c) 0 50 100 150 200 250 300 350 400 current (ma) hold current protective threshold current trip current 80 c protective threshold current range (250v series) ptgl07bb220n0b52a0 protective threshold current (ma) 100 20 300 400 200 ambient temperature (c) 0 C20 0 40 60 80 protective threshold current hold current trip current ptgl10bb120n0p52a0 current (ma) C20 ambient temperature (c) 0 20406080 0 trip current hold current protective threshold current 400 300 200 100 ptgl09ar390n0b52a0 20 20 80 60 40 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current current (ma) c protective threshold current range (265v series) ptgl05ar151h8p52b0 current (ma) 20 20 120 80 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 40 60 100 ptgl05ar181m9n51b0 continued on the following page. maximum current shows typical capacities of the transformer which can be used. 250/265v series are recognized by ul. only ptgl_52b0 type is available in taping type. please refer to the page of "package" information for details. r90e.pdf sep.24,2012 57 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 9
continued from the preceding page. current (ma) 20 20 120 80 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 40 60 100 c protective threshold current range (265v series) ptgl05ar121m9n51b0 current (ma) 50 20 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 100 150 250 ptgl07ar820m9a51b0 50 20 200 150 100 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current current (ma) ptgl07ar700h8b52b0 current (ma) 100 20 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 300 ptgl07ar650h8b52b0 current (ma) 100 20 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 300 ptgl07ar450h8b52b0 current (ma) 50 20 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 100 150 250 ptgl07ar560m9a51b0 current (ma) 100 20 400 300 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 ptgl09ar390m9c61b0 current (ma) 100 20 300 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl09ar250h8b52b0 continued on the following page. r90e.pdf sep.24,2012 58 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 9
continued from the preceding page. current (ma) 100 20 400 300 200 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 c protective threshold current range (265v series) ptgl12ar270m9c01b0 current (ma) 200 20 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl12ar150h8b72b0 current (ma) 200 20 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current 80 ptgl14ar180m9c01b0 current (ma) 200 20 800 600 400 ambient temperature (c) 0 C20 0 40 60 trip current protective threshold current hold current ptgl13ar100h8b72b0 current (ma) 500 20 1000 ambient temperature (c) 0 C20 0 40 60 protective threshold current hold current 1500 trip current ptgl18ar6r0h8b72b0 r90e.pdf sep.24,2012 59 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 9
overcurrent (a) 0.5 1.0 1.5 10 20 30 40 operating time (sec.) C10c 25c ambient temp. 60c c operating time 250v series (typical curve) ptgl07bb220n0b52a0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 ptgl10bb120n0p52a0 operating time (sec.) 0 overcurrent (a) 30 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 2.0 20 10 ptgl09ar390n0b52a0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.04 0.08 0.12 0.16 0.20 c operating time 265v series (typical curve) ptgl05ar151h8p52b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.2 0.4 0.6 0.8 ptgl05ar181m9n51b0 continued on the following page. r90e.pdf sep.24,2012 60 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 9
continued from the preceding page. operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.2 0.4 0.6 0.8 c operating time 265v series (typical curve) ptgl05ar121m9n51b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 ptgl07ar820m9a51b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.2 0.4 0.6 0.8 ptgl07ar700h8b52b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 0.2 0.4 0.6 0.8 1.0 C10c 25c ambient temp. 60c ptgl07ar650h8b52b0 operating time (sec.) 0 overcurrent (a) 70 50 40 30 20 10 0 0.2 0.4 0.6 0.8 1.0 1.2 60 C10c 25c ambient temp. 60c ptgl07ar450h8b52b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 0.5 1.0 1.5 ptgl07ar560m9a51b0 continued on the following page. r90e.pdf sep.24,2012 61 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 9
continued from the preceding page. operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 c operating time 265v series (typical curve) ptgl09ar390m9c61b0 operating time (sec.) 0 overcurrent (a) 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.2 0.4 0.6 0.8 1.0 ptgl09ar250h8b52b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 ptgl12ar270m9c01b0 operating time [sec.] 0 overcurrent [a] 70 60 50 40 30 20 10 0 C10c 25c 60c ambient temp. 0.4 0.8 1.2 ptgl12ar150h8b72b0 operating time [sec.] 0 overcurrent [a] 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 0.4 0.8 1.2 1.6 ptgl14ar180m9c01b0 operating time (sec.) 0 overcurrent (a) 25 20 15 10 5 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 ptgl13ar100h8b72b0 continued on the following page. r90e.pdf sep.24,2012 62 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 9
continued from the preceding page. operating time [sec.] 0 overcurrent [a] 70 60 50 40 30 20 10 0 C10c 25c ambient temp. 60c 1.0 2.0 3.0 4.0 c operating time 265v series (typical curve) ptgl18ar6r0h8b72b0 r l r a r e r b c pth c application circuit (1) transistor protection circuit power supply d c pth (2) transformer protection circuit 1) power supply pth (3) transformer protection circuit 2) power source fluorescent lamp ss r c c ch c pth (4) fluorescent lamp protection circuit arrester pth pth varistor varistor telephone or pbx (5) telecommunication circuit r90e.pdf sep.24,2012 63 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 9
ptgl series narrow current band speci cations and test methods continued on the following page. posistor r is set at room temperature (252c) with maximum voltage applied for 1 minute and then is left without voltage applied for 5 minutes. this cycle is repeated for 100 cycles, and after the device is left at room temperature (25c) for one hour, the resistance measurement is performed. (a protective resistor is to be connected in series and the inrush current through posistor r must be limited below maximum rated value.) 12 load cycle test at room temperature r/r25v20% posistor r is set in an environmental chamber at 853c with maximum voltage applied for 5004 hours. after the device is left at room temperature (25c) for one hour, the resistance measurement is performed. (a protective resistor is to be connected in series and the inrush current through posistor r must be limited below maximum rated value.) 11 load test at high temperature r/r25v20% posistor r is set in an environmental chamber at 602c and 90-95% humidity for 5004 hours. after the device is left at room temperature (25c) for one hour, the resistance measurement is then performed. 10 humidity test r/r25v20% the lead wire of posistor r is soaked in molten solder (jis z 3282 h60a) at 35010c from the bottom to a point of 2.0-2.5mm for 3.50.5 seconds. after the device is left at room temperature (25c) for 244 hours, the resistance is then measured. 9 terminal durability of soldering r/r25v15% the lead wire of posistor r is soaked in an isopropyl alcohol (jis k 8839) solution (about 25wt%) of colophony (jis k 5902) for 5-10 sec. each lead wire is soaked in molten solder (jis z 3282 h60a) at 2355c from the bottom to a point of 2.0-2.5mm for 20.5 seconds. 8 solderability solder is applied around the lead wire covering 3/4 or more of the circumference without gap in the axial direction. posistor r is held so that it is perpendicular to the lead wire with the following lead hanging in the axial direction of the lead wire. the lead wire is slowly bent to 90 and returned. then it is slowly bent in the opposite direction and returned to original state. 7 bending strength of lead wire terminal lead wire does not come off the load is gradually applied to each terminal of posistor r until the force of the following table in the axial direction with fixing posistor r's body itself and this load is kept for 10 seconds. 6 tensile strength of lead wire terminal no damage maximum current is measured in this examination. voltage is applied to posistor r for 3 minutes step by step on still air based on "protective threshold current test conditions" shown in next page. stable current is measured at each step. 5 protective threshold current satisfies ratings (trip current, hold current) we apply ac voltage 120% that of the maximum voltage to posistor r by raising voltage gradually for 1805 seconds at 25c. (a protective resistor is to be connected in series, and the inrush current through posistor r must be limited below maximum rated value.) 4 withstanding voltage no problem resistance value is measured by applying voltage under 1.0vdc (by a direct current of less than 10ma) at 25c. but it must be measured after maximum voltage is applied for 180 seconds and then is left for 2 hours at 25c. 3 resistance value (at 25c) satisfies ratings the temperature range with zero voltage. 2 storage temperature -40 to +125c the temperature range with maximum voltage applied to the posistor r. 1 operating temperature -30 to +85c lead diameter force 4.90n 9.80n ?0.60mm max. ?0.65mm min. lead diameter force 2.45n 4.90n ?0.60mm max. ?0.65mm min. no. method of examination rating value item r90e.pdf sep.24,2012 64 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
ptgl series narrow current band speci cations and test methods continued from the preceding page. 25.0 5.0 2.5 1.0 ?0.9 25.0 25.0 25.0 2.5 2.5 3.0 (in mm) d.c power supply d.v + - posistorr 1 digital voltmeter d.v + - digital voltmeter materials: phenol size: 50x50xt1.6mm land pattern: cu land without through hole 1. substrate 3. measurement circuit solder posistorr on the substrate, then put a 150mm 3 cover surrounding posistorr to prevent airflow. 2. measurement condition c protective threshold current test conditions r90e.pdf sep.24,2012 65 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
ptgl series speci cations and test methods posistor r is set in an environmental chamber at 603c with maximum voltage applied for 1.5 hours and then is left without voltage applied for 0.5 hours. this cycle is repeated for 100010 hours, and after the device is left at room temperature (25c) for one hour, the resistance measurement is performed. (a protective resistor is to be connected in series and the inrush current through posistor r must be limited below max. rated value.) load cycle test at high temperature r/r25 < = 20% posistor r is set in an environmental chamber at 402c and 90 to 95% humidity for 5004 hours. after the device is left at room temperature (25c) for one hour, the resistance measurement is performed. humidity test r/r25 < = 20% the lead wire of posistor r is soaked in molten solder (jis z 3282 h60a) at 35010c from the bottom to a point of 2.0 to 2.5mm for 3.50.5 sec. after the device is being left at room temperature (25c) for 244 hours, the resistance is measured. terminal durability of soldering r/r25 < = 15% the lead wire of posistorr is soaked in an isopropyl alcohol (jis k 8839) or ethanol (jis k 8101) solution (about 25wt%) of colophony (jis k 5902) for 5 to 10 sec. and, each lead wire is soaked in molten solder (jis z 3282 h60a) at 2355c from the bottom to a point of 2.0 to 2.5mm for 20.5 sec. solderability solder is applied around the lead wire covering 3/4 or more of the circumference without gap in the axial direction. posistor r is held so that it is perpendicular to the lead wire with the following lead hanging in the axial direction of the lead wire. the lead wire is slowly bent to 90 and returned. then it is slowly bent in the opposite direction and returned to original state. bending strength of lead wire terminal lead wire does not come off. the load is gradually applied to each terminal of posistor r until the force of the following table in the axial direction with fixing posistor r's body itself and this load is being kept for 10 seconds. tensile strength of lead wire terminal no damage we apply ac voltage 120% (16v series: 110%) that of the maximum voltage to posistor r by raising voltage gradually for 1805 seconds at 25c. (a protective resistor is to be connected in series, and the inrush current through posistor r must be limited below max. rated value.) withstanding voltage no problem resistance value is measured by applying voltage under 1.5vdc (by a direct current of less than 10ma) at 25c. but it must be measured after maximum voltage is applied for 180 seconds and then is left for 2 hours at 25c. as for 16v series, measurement probes should be connected on the lead wire at the point within 2mm from the below side of the forming. resistance should be measured by 4 wiring method. resistance value (at 25c) satisfies ratings the temperature range with maximum voltage applied to the posistor r. continuous operating temperature -10 to +60 c lead diameter force 4.90n 9.80n ?0.60mm max. ?0.65mm min. lead diameter force 2.45n 4.90n ?0.60mm max. ?0.65mm min. method of examination rating value item r90e.pdf sep.24,2012 66 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
posistor r for circuit protection inrush current suppression (less than 100?) f1.5 ?d0.05 d max. t max. 6.0 max. 4.01.5 (in mm) part number max. voltage (v) resistance (at +25c) (ohm) max. inrush current (a) max. applying time of inrush (ms) body diameter (d) (mm) thickness (t) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl07as121m0n51b0 280 120 20% 8.46 peak 10 7.8 6.0 5.0 0.5 ptgl07as181m0n51b0 280 180 20% 6.22 peak 10 7.8 6.0 5.0 0.5 ptgl07as201m0n51b0 280 200 20% 5.66 peak 10 7.8 6.0 5.0 0.5 max. inrush current shows the maximum inrush current value which be introduced into "posistor" at operating temperature range. max. applying time of inrush shows the maximum applying time of inrush current value at operating temperature range. operating temperature range is -40 to +105c. taping type of part numbers with "a0" is available. r90e.pdf sep.24,2012 67 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 10 posistorr is one of lead type ptc thermistor that is able to support overcurrent or inrush current issue on the power supply circuit. it is able to integrated circuit for protection from inrush current suppression with posistorr and relay or semiconductor switch as thyristor. c features 1. protection against overcurrent situations 2. automatic reset from protective trip mode 3. space-saving 4. various characteristics to meet a suitable resistance value c applications posistorr is an integrated solution to work as both current limit resistor and overcurrent fuse. it works as a stable resistor in normal operation and products itself against overcurrent situation. it can be replaced from normal resistor or the resistor with temperature fuses solution as fig.1. fig.1 posistorr works as normal resistor in normal condition, and it works as protector against over current situation on the circuit. 1. high-power switching power supply (lcd tv) 2. the power supply for inverter on outside unit for air-conditioner 3. the power supply for inverter type fluorescent lamp 4. other sw type power supply load posistor r + - load + -
posistor r for circuit protection inrush current suppression for high capacitance (100? or more) f1.5 ?d0.05 d max. t max. 6.0 max. 4.01.5 (in mm) part number max. voltage (v) resistance (at +25c) (ohm) max. inrush current (a) max. charge energy (at +60c) (j) max. charge energy (at +85c) (j) body diameter (d) (mm) thickness (t) (mm) lead space (f) (mm) lead diameter (phi d) (mm) ptgl14as470h0b02bz 280 47 ?5% 27 peak 106.9 56.9 16.0 6.5 10.0 0.6 ptgl16as330h0b02bz 280 33 ?5% 39 peak 130.8 80.8 18.0 6.5 10.0 0.6 ptgl16as470h0b02bz 280 47 ?5% 27 peak 130.8 80.8 18.0 6.5 10.0 0.6 ptgl16as680h0b02bz 280 68 ?5% 19 peak 130.8 80.8 18.0 6.5 10.0 0.6 ptgl16as101h0b02bz 280 100 ?5% 13 peak 130.8 80.8 18.0 6.5 10.0 0.6 ptgl20as330h0d02bz 280 33 ?5% 39 peak 181.7 131.7 22.0 6.5 10.0 0.8 ptgl20as470h0d02bz 280 47 ?5% 27 peak 181.7 131.7 22.0 6.5 10.0 0.8 max. inrush current shows the maximum applying time of inrush current value at operating temperature range. max charge energy is de ned as the maximum charged up energy value of over 95%. the capacitance is calculated as the following formula. j=cv^2/2 c: capacitance, v: peak voltage note: the criteria of the standard for the maximum charged up energy value of over 95%. if there is the difference between our de nition and yours, could you ask us free? operating temperature range is -20 to +85?. r90e.pdf sep.24,2012 68 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ?this catalog has only typical speci cations. therefore, please approve our product speci cations or transact the approval sheet for product speci cations before ordering. 11 posistorr is one of lead type ptc thermistor that is able to support overcurrent or inrush current issue on the power supply circuit. it is able to integrated circuit for protection from inrush current suppression with posistorr and relay or semiconductor switch as thyristor. c features 1. protection against overcurrent situations 2. automatic reset from protective trip mode 3. space-saving 4. various characteristics to meet a suitable resistance value c applications posistorr is an integrated solution to work as both current limit resistor and overcurrent fuse. it works as a stable resistor in normal operation and products itself against overcurrent situation. it can be replaced from normal resistor or the resistor with temperature fuses solution as fig.1. fig.1 posistorr works as normal resistor in normal condition, and it works as protector against over current situation on the circuit. 1. high-power switching power supply (lcd tv) 2. the power supply for inverter on outside unit for air-conditioner 3. the power supply for inverter type fluorescent lamp 4. other sw type power supply load posistor r + - load + -
inrush current suppression speci cations and test methods posistor r is set in a room temperature (252c) with maximum voltage applied for 1 minute, and then is left without voltage applied for 5 minutes. this cycle is repeated for 10k cycles, and after the device is left at room temperature (25c) for one hour, the resistance measurement is performed. load cycle test at room temperature r/r25v20% posistor r is set in an environmental chamber at 853c with maximum voltage applied for 5004 hours. after the device is left at room temperature (25c) for one hour, the resistance measurement is performed. high temperature continuous load r/r25v20% posistor r is set in an environmental chamber at 853c and 85% humidity for 5004 hours. after the device is left at room temperature (25c) for one hour, the resistance measurement is performed. humidity test r/r25v20% method of examination rating value item r90e.pdf sep.24,2012 69 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
posistor r for circuit protection overheat sensing chip tight tolerance type this chip ptc thermistor is a re? ow soldering smd type for overheat sensing for power transistors, power diodes and power ics in hybrid circuits. c features 1. smd type is helpful for miniaturizing circuits because of its small size and light weight. 2. excellent thermal response due to small size 3. solid-state construction provides excellent resistance to mechanical vibration and impact resistance. 4. contactless operation provides noiseless operation. l t part number lwt dimensions (mm) eg 1.00.05 1.60.15 0.50.05 0.80.15 0.50.05 0.80.15 0.15 to 0.4 0.1 to 0.6 0.3 min. - prf15_rc prf18_rb w e e g chip tight tolerance type 0402 (1005) size part number sensing temperature (at 10k ohm) (c) sensing temperature (at 100k ohm) (c) maximum voltage (v) resistance (at 25c) (k ohm) operating temperature range (c) prf15ar102rb6rc 135 5c 150 3c 32 1 50% -40 to 160 prf15ba102rb6rc 125 5c 140 3c 32 1 50% -40 to 150 PRF15BB102RB6RC 115 5c 130 3c 32 1 50% -40 to 140 prf15bc102rb6rc 105 5c 120 3c 32 1 50% -40 to 130 prf15bd102rb6rc 95 5c 110 3c 32 1 50% -40 to 120 prf15be102rb6rc 85 5c 100 3c 32 1 50% -40 to 110 prf15bf102rb6rc 75 5c 90 3c 32 1 50% -40 to 100 prf15bg102rb6rc 65 5c 80 3c 32 1 50% -40 to 90 this series is applied to re? ow soldering. part number sensing temperature (at 4.7m ohm) (c) maximum voltage (v) resistance (at 25c) (k ohm) operating temperature range (c) prf15bb103rb6rc 130 3c 32 10 50% -20 to 140 prf15be103rb6rc 100 3c 32 10 50% -20 to 110 prf15bg103rb6rc 80 3c 32 10 50% -20 to 90 this series is applied to re? ow soldering. chip tight tolerance type 0603 (1608) size this series is applied to ? ow/re? ow soldering. this series is recognized by ul. part number sensing temperature (at 4.7k ohm) (c) sensing temperature (at 47k ohm) (c) maximum voltage (v) resistance (at 25c) (ohm) operating temperature range (c) prf18bb471rb5rb 115 3c 130 7c 32 470 50% -20 to 140 prf18bc471rb5rb 105 3c 120 7c 32 470 50% -20 to 130 prf18bd471rb5rb 95 3c 110 7c 32 470 50% -20 to 120 prf18be471rb5rb 85 3c 100 7c 32 470 50% -20 to 110 prf18bf471rb5rb 75 3c 90 7c 32 470 50% -20 to 100 prf18bg471rb5rb 65 3c 80 7c 32 470 50% -20 to 90 r90e.pdf sep.24,2012 70 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 12
posistor r for circuit protection overheat sensing chip type this chip ptc thermistor is a re ow soldering smd type for overheat sensing for power transistors, power diodes and power ics in hybrid circuits. c features 1. smd type is helpful for miniaturizing circuits because of its small size and light weight. 2. excellent thermal response due to small size 3. solid-state construction provides excellent resistance to mechanical vibration and impact resistance. 4. contactless operation provides noiseless operation. l t part number lwt dimensions (mm) eg 1.60.15 2.00.2 0.80.15 1.250.2 0.80.15 0.90.2 0.1 to 0.6 0.2 min. - 0.5 min. prf18_rb prf21_ra w e e g chip type 0603 (1608) size part number sensing temperature (at 4.7k ohm) (c) sensing temperature (at 47k ohm) (c) maximum voltage (v) resistance (at 25c) (ohm) operating temperature range (c) prf18as471qb5rb 145 ?? - 32 470 ?0% -20 to 160 prf18ar471qb5rb 135 ?? 150 ?? 32 470 ?0% -20 to 160 prf18ba471qb5rb 125 ?? 140 ?? 32 470 ?0% -20 to 150 prf18bb471qb5rb 115 ?? 130 ?? 32 470 ?0% -20 to 140 prf18bc471qb5rb 105 ?? 120 ?? 32 470 ?0% -20 to 130 prf18bd471qb5rb 95 ?? 110 ?? 32 470 ?0% -20 to 120 prf18be471qb5rb 85 ?? 100 ?? 32 470 ?0% -20 to 110 prf18bf471qb5rb 75 ?? 90 ?? 32 470 ?0% -20 to 100 prf18bg471qb5rb 65 ?? 80 ?? 32 470 ?0% -20 to 90 this series is applied to ow/re ow soldering. this series is recognized by ul. chip type 0805 (2012) size part number sensing temperature (at 4.7k ohm) (c) maximum voltage (v) resistance (at 25c) (ohm) operating temperature range (c) prf21as471qb5ra 145 ?? 32 470 ?0% -20 to 160 prf21ar471qb5ra 135 ?? 32 470 ?0% -20 to 150 prf21ba471qb5ra 125 ?? 32 470 ?0% -20 to 140 prf21bb471qb5ra 115 ?? 32 470 ?0% -20 to 130 prf21bc471qb5ra 105 ?? 32 470 ?0% -20 to 120 prf21bd471qb5ra 95 ?? 32 470 ?0% -20 to 110 prf21be471qb5ra 85 ?? 32 470 ?0% -20 to 100 this series is applied to ow/re ow soldering. this series is recognized by ul. r90e.pdf sep.24,2012 71 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ?this catalog has only typical speci cations. therefore, please approve our product speci cations or transact the approval sheet for product speci cations before ordering. 13
overheat sensing chip type (related data) a c solder resist (in mm) b land chip part number chip (lgw) a dimensions (mm) bc 1.0g0.5 1.6g0.8 soldering methods 0.5 0.4-0.5 0.5 reflow soldering 0.6-0.8 0.6-0.7 0.6-0.8 2.0g1.25 1.0-1.2 0.5-0.7 1.0-1.2 prf15 prf18 prf21 c standard land pattern dimensions 0.1 1 10 100 1000 C20 0 20 40 60 80 100 120 140 160 temperature (c) be bd bc bb ba ar as bf bg resistance change (r/r25) r 1 r 2 thermal +vcc r l r e connection pth c overheat protection circuit r 1 r l1 r l2 r e1 r e2 load +vcc pth c temperature sensing circuit r90e.pdf sep.24,2012 72 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. c resistance - temperature characteristics (typical)
overheat sensing chip tight tolerance type (reference data) ambient temperature (c) resistance (k) 0.1 1 10 100 1000 C40 0 40 80 120 160 200 c resistance - temperature characteristics range prf15ar102rb6rc ambient temperature (c) resistance (k) 0.1 1 10 100 1000 C40 0 40 80 120 160 200 prf15ba102rb6rc ambient temperature (c) resistance (k) 0.1 1 10 100 1000 C40 0 40 80 120 160 200 PRF15BB102RB6RC ambient temperature (c) resistance (k) 0.1 1 10 100 1000 C40 0 40 80 120 160 200 prf15bc102rb6rc continued on the following page. r90e.pdf sep.24,2012 73 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. ambient temperature (c) resistance (k) 0.1 1 10 100 1000 C40 0 40 80 120 160 200 prf15bd102rb6rc ambient temperature (c) resistance (k) 0.1 1 10 100 1000 C40 0 40 80 120 160 200 prf15be102rb6rc
overheat sensing chip tight tolerance type (reference data) continued from the preceding page. c resistance - temperature characteristics range ambient temperature (c) resistance (k) 0.1 1 10 100 1000 C40 0 40 80 120 160 200 prf15bf102rb6rc ambient temperature (c) resistance (k) 0.1 1 10 100 1000 C40 0 40 80 120 160 200 prf15bg102rb6rc continued on the following page. r90e.pdf sep.24,2012 74 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. ambient temperature (c) resistance (k) -20 0 20 40 60 80 100 120 140 160 100000 10000 1000 100 10 1 prf15bb103rb6rc ambient temperature (c) resistance (k) 1 10 100 1000 10000 100000 C20 0 20 40 60 80 100 120 140 prf15be103rb6rc ambient temperature (c) resistance (k) 1 10 100 1000 10000 100000 C20 0 20 40 60 80 100 120 140 prf15bg103rb6rc temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18bb471rb5rb
overheat sensing chip tight tolerance type (reference data) continued from the preceding page. temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 c resistance - temperature characteristics range prf18bc471rb5rb temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18bd471rb5rb temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18be471rb5rb temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18bf471rb5rb r90e.pdf sep.24,2012 75 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18bg471rb5rb
overheat sensing chip type (ref. only) temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 c resistance - temperature characteristics range prf18/21as471q type temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18/21ar471q type temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18/21ba471q type temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18/21bb471q type continued on the following page. r90e.pdf sep.24,2012 76 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18/21bc471q type temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18/21bd471q type
overheat sensing chip type (ref. only) continued from the preceding page. c resistance - temperature characteristics range temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18/21be471q type temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18bf471q type r90e.pdf sep.24,2012 77 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. temperature (c) resistance () C20 0 20 40 60 80 100 120 140 160 100 100000 10000 1000 prf18bg471q type
overheat sensing chip tight tolerance type speci cations and test methods reference standard: iec 60068-2-2 (2007) soldered ptc to pcb (**) (max. operating temp.)2c applied max. voltage 1000+48/-0 hrs. 9 high temperature load reference standard: iec 60068-2-14 (2009) [ test na ] soldered ptc to pcb (**) transport time: <10 sec. test condition: see below table test cycle: 5 cycles 8 thermal shock reference standard: iec 60068-2-67 (1995) soldered ptc to pcb (**) +852c, 855%rh 1000+48/-0 hrs 7 damp heat, steady state reference standard: iec 60068-2-1 (2007) soldered ptc to pcb (**) (min. operating temp.)3c 1000+48/-0 hrs 6 low temperature storage reference standard: iec 60068-2-2 (2007) soldered ptc to pcb (**) (max. operating temp.)2c 1000+48/-0 hrs. 5 high temperature storage appearance: no defects or abnormalities resistance (r25) change: less than 20% (*) reference standard: iec 60068-2-58 (2004) [ solder bath method ] solder: sn-3.0ag-0.5cu preheat: 1505c, 90 to 120s solder temp.: 2605c immersion time: 101s 4 resistance to soldering heat appearance: no defects or abnormalities resistance (r25) change: less than 20% (*) reference standard: iec 60068-2-58 (2004) solder: sn-3.0ag-0.5cu solder temp.: 2455c immersion time: 30.3s 3 solderability wetting of soldering area: u95% reference standard: iec 60068-2-6 (1995) soldered ptc to pcb (**) frequency range: 10 to 55hz amplitude: 1.5mm sweep rate: 1 octave/min. direction: x-y-z (3 direction) 24 cycles in each axis 2 vibration s2esistance2 change,essthan 20% (*) s!ppearance.odefectsorabnormalities after applying maximum operating voltage for 3 mins. and leaving for 2 hours in 25c, measured by applying voltage less than dc1.0v. 1 resistance value at 25c within the specified range *: the resistance value after the test. it is measured by applying voltage less than dc1.0v after left at 252c for 2hrs. **: above mentioned soldering is done under the following conditions at our side. glass-epoxy pc board standard land dimension standard solder paste standard solder profile above conditions are mentioned in notice. no. test conditions creteria item condition step (min. operating temp.)3c (max. operating temp.)2c time 30min. 30min. 1 2 c prf15_102r series r90e.pdf sep.24,2012 78 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
overheat sensing chip tight tolerance type speci cations and test methods soldered ptc to pcb. (**) 853c (in air), load max. operating voltage for 1000+12/-0 hrs. 9 high temperature load soldered ptc to pcb. (**) cycles: 5 cycles conditions: see below table 8 temperature cycling soldered ptc to pcb. (**) +603c, 90 to 95%rh leave for 1000+12/-0 hrs. 7 damp heat soldered ptc to pcb. (**) -203c leave for 1000+12/-0 hrs. 6 cold soldered ptc to pcb. (**) +1253c leave for 1000+12/-0 hrs. this test condition is according to "jis c 60068-2-2 (1995)." 5 dry heat there is no abnormal appearance after the test. resistance change is less than 20%.(*) solder temp.: 2605c solder: sn 63%/pb 37% (or 60/40%) flux: containing less than 0.2wt% of chlorine. soaking time: 101 secs. soaking position: until a whole electrode is soaked. preheating: 1505c 3 mins. this test condition is according to "jis c 60068-2-58 (2006)." 4 soldering heat resistance there is no abnormal appearance after the test. resistance change is less than 20%.(*) solder temp.: 2305c solder: sn 63%/pb 37% (or 60/40%) soaking time: 30.5 secs. soaking position: until a whole electrode is soaked. this test condition is according to "jis c 60068-2-58 (2006)." 3 solderability min. 95% electrode is covered with new solder. resistance change is less than 20%.(*) soldered ptc to pcb (**) vibration: 10 to 55 to 10hz (1min.) max. amplitude: 1.5mm vibrate for 2 hours in each of 3 mutually perpendicular plane for a total of 6 hours. this test condition is according to "jis c 60068-2-6 (1999)." 2 vibration there is no abnormal appearance after the test. resistance change is less than 20%.(*) after applying maximum operating voltage for 3 minutes and leaving for 2 hours at 25c, measured by applying voltage of less than 3vdc. 1 resistance value (at 25c) the resistance value should be within the specified tolerance. *: the resistance measurement after the test. it is measured by applying voltage less than 3vdc after left at 252c for 2 hours. **: above mentioned soldering is done under the following conditions at our side. glass-epoxy pc board standard land dimension standard solder paste standard solder profile above conditions are mentioned in notice. no. method of examination rating value item temp. (c) step -20+0, -3 room temp. +125+3, -0 room temp. time (minute) 30 10 to 15 30 10 to 15 1 2 3 4 c prf15_103r series r90e.pdf sep.24,2012 79 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
overheat sensing chip tight tolerance type speci cations and test methods soldered ptc to pcb. (**) 852c (in air), load max. operating voltage for 100012 hours 10 high temperature load soldered ptc to pcb. (**) +402c, 90-95%rh leave for 5008 hours 9 damp heat jis c 5102 term 9.3 soldered ptc to pcb. (**) times: 5 cycles 8 temperature cycling soldered ptc to pcb. (**) -203c leave for 100012 hours 7 cold soldered ptc to pcb. (**) 1502c leave for 100012 hours 6 dry heat normal appearance resistance change: not to exceed 20% (*) sensing temperature change: not to exceed 1c jis c 60068-2-20 (1996) solder temp.: 2605c solder: sn63%/pb37% (or 60%/40%) flux: containing less than 0.2wt% of chlorine soaking time: 100.5 seconds soaking position: until a whole electrode is soaked. preheating: 1505c, 3 minutes 5 soldering heat resistance resistance change: not to exceed 20% (*) jis c 60068-2-20(1996) solder temp.: 2305c solder: sn63%/pb37% (or 60%/40%) soaking time: 30.5 seconds soaking position: until a whole electrode is soaked. 4 solderability min. 95% electrode is covered with new solder. resistance change: not to exceed 20% (*) jis c 5102 term 8.2 soldered ptc to pcb (**) vibration: 10-55-10hz (1 min.) width: 1.5mm vibrate for 2 hours. in each of 3 mutually perpendicular plane for a total of 6 hours 3 vibration resistance normal appearance resistance change: not to exceed 20% (*) eiaj et-7403 term 9 prepare soldered ptc to pcb (**) and add the force of 5.0n in the direction as shown below. (ptc=posistor r) 2 adhesive strength there is no sign of exfoliation on electrode. after applying max. operating voltage for 3 minutes and leaving for 2 hours in 25c, measured by applying voltage less than 1.5vdc. (by a direct current less than 10ma). 1 resistance value (25c) the resistance value shall be within the specified tolerance. (*) the resistance measurement after the test. it is measured by applying voltage less than 1.5vdc. (by a direct current less than 10ma.) after left at 252c for 2 hours. (**) above mentioned soldering is done under the following conditions at our side. s'lass %poxy0#board s3tandardlanddimensions s2ecommendablesolderpaste s2ecommendablesolderprofile above conditions are mentioned in notice. no. test condition specification item temp. (c) step -20+0, -3 room temp. +150+3, -0 room temp. time (min.) 30 10 to 15 30 10 to 15 1 2 3 4 'lass%poxy0#" f f ptc c prf18_471r series r90e.pdf sep.24,2012 80 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
overheat sensing chip type speci cations and test methods soldered ptc to pcb. (**) 852c (in air), load max. operating voltage for 100012 hours 10 high temperature load soldered ptc to pcb. (**) +402c, 90-95%rh leave for 5008 hours 9 damp heat jis c 5102 term 9.3 soldered ptc to pcb. (**) times: 5 cycles 8 temperature cycling soldered ptc to pcb. (**) -203c leave for 100012 hours 7 cold soldered ptc to pcb. (**) 1502c leave for 100012 hours 6 dry heat normal appearance resistance change: not to exceed 20% (*) jis c 60068-2-20 (1996) solder temp.: 2605c solder: sn63%/pb37% (or 60%/40%) flux: containing less than 0.2wt% of chlorine soaking time: 100.5 seconds soaking position: until a whole electrode is soaked. preheating: 1505c, 3 minutes 5 soldering heat resistance resistance change: not to exceed 20% (*) jis c 60068-2-20(1996) solder temp.: 2305c solder: sn63%/pb37% (or 60%/40%) soaking time: 30.5 seconds soaking position: until a whole electrode is soaked. 4 solderability min. 95% electrode is covered with new solder. resistance change: not to exceed 20% (*) jis c 5102 term 8.2 soldered ptc to pcb (**) vibration: 10-55-10hz (1 min.) width: 1.5mm vibrate for 2 hours. in each of 3 mutually perpendicular plane for a total of 6 hours 3 vibration resistance normal appearance resistance change: not to exceed 20% (*) eiaj et-7403 term 9 prepare soldered ptc to pcb (**) and add the force of 5.0n in the direction as shown below. (ptc=posistor r) 2 adhesive strength there is no sign of exfoliation on electrode. after applying max. operating voltage for 3 minutes and leaving for 2 hours in 25c, measured by applying voltage less than 1.5vdc. (by a direct current less than 10ma). 1 resistance value (25c) the resistance value shall be within the specified tolerance. (*) the resistance measurement after the test. it is measured by applying voltage less than 1.5vdc. (by a direct current less than 10ma.) after left at 252c for 2 hours. (**) above mentioned soldering is done under the following conditions at our side. s'lass %poxy0#board s3tandardlanddimensions s2ecommendablesolderpaste s2ecommendablesolderprofile above conditions are mentioned in notice. no. test condition specification item temp. (c) step -20+0, -3 room temp. +150+3, -0 room temp. time (min.) 30 10 to 15 30 10 to 15 1 2 3 4 'lass%poxy0#" f f ptc c prf18/21_471q series r90e.pdf sep.24,2012 81 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
posistor r for circuit protection overheat sensing lead type ptfm series has been developed for protecting power transistors, stereo main ampli? ers, etc. from overheating, and also for sensing the temperature of other components which may be overheated. the "posistor" offers an excellent temperature sensing ability, exhibiting a steep change in electrical resistivity near the temperature setting. ptfl series is suitable for use as an air temperature sensor. c features 1. ptfm series is a screw-? xing type and ptfl series is a lead type, providing ease of mounting. 2. compact and light design as well as excellent thermal response. 3. solid-state construction withstands mechanical vibration and impact suf? ciently. 4. contactless operation provides a prolonged service life, yet permits noiseless operation. 5. the operating point of "posistor" is set on the steepest point along the resistance-temperature characteristic curve, thus performing the overheat protective operation securely. 6. ptfm series and ptfl series have the same temperature characteristic, providing a selection depending on the mounting method. 3.51.5 4.0 max. ?0.50.05 (in mm) 5.0 max. 3.0 max. 25 min. ptfl series ?0.50.05 2.5max. t0.50.05 3.00.3 7.50.4 3.70.3 13.20.5 395 3.51.5 in mm ptfm series part number max. voltage (v) sensing temp. (ts) (c) resistance value at 25c (max.) (ohm) resistance value (ts-10c) (max.) (ohm) resistance value (tsc) (min.) (ohm) ptf p 4bh471q2n34b0 16 60 100 330 470 ptf p 4bg471q2n34b0 16 70 100 330 470 ptf p 4bf471q2n34b0 16 80 100 330 470 ptf p 4be471q2n34b0 16 90 100 330 470 ptf p 4bd471q2n34b0 16 100 100 330 470 ptf p 4bc471q2n34b0 16 110 100 330 470 ptf p 4bb471q2n34b0 16 120 100 330 470 ptf p 4bh222q2n34b0 16 60 330 1.5k 2.2k ptf p 4bg222q2n34b0 16 70 330 1.5k 2.2k ptf p 4bf222q2n34b0 16 80 330 1.5k 2.2k ptf p 4be222q2n34b0 16 90 330 1.5k 2.2k ptf p 4bd222q2n34b0 16 100 330 1.5k 2.2k ptf p 4bc222q2n34b0 16 110 330 1.5k 2.2k ptf p 4bb222q2n34b0 16 120 330 1.5k 2.2k a blank is ? lled with type codes. (l: lead type, m: with lug-terminal) operating temperature range is -10 to ts+10c. please contact us for ul recognized products. r90e.pdf sep.24,2012 82 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 14
resistance change (r/r25c) C20 temperature (c) 10 4 10 3 10 2 10 1 0 20 40 60 80 100 120 140 bc bd be bf bg bh bb c resistance - temperature characteristics 60 50 40 30 20 100 20 0 40 60 80 100 time (sec.) aluminum plate t=90c constant ptfm04be222q2n34b0 relation between resistance change and time after posistor r ptfm04be222q2n34b0 is installed on the part heated at a constant temperature of 90c (3mm thick alminum sheet) is shown in the figure above. resistance change (%) (r/r90c) heater r meter posistor r screw c example of thermal response time operating time of posistor r r 1 r 2 thermal +vcc r l r e connection pth c overheat protection circuit r 1 r l1 r l2 r e1 r e2 load +vcc pth c overheat sensing circuit resistance () 0 temperature (c) 10 2 C20 40 60 120 80 100 140 10 10 3 10 4 20 c resistance - temperature characteristics range (ref. only) ptf_04bh471q2n34b0 resistance () 0 temperature (c) 10 2 C20 40 60 120 80 100 140 10 10 3 10 4 20 ptf_04bg471q2n34b0 continued on the following page. r90e.pdf sep.24,2012 83 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 14
continued from the preceding page. resistance () 0 temperature (c) 10 2 C20 40 60 120 80 100 140 10 10 3 10 4 20 c resistance - temperature characteristics range (ref. only) ptf_04bf471q2n34b0 resistance () 0 temperature (c) 10 2 C20 40 60 120 80 100 140 10 10 3 10 4 20 ptf_04be471q2n34b0 resistance () C20 temperature (c) 10 2 0 20 40 100 60 80 140 120 10 10 3 10 4 ptf_04bd471q2n34b0 resistance () 0 temperature (c) 10 2 20 40 60 120 80 100 160140 10 10 3 10 4 ptf_04bc471q2n34b0 resistance () 0 temperature (c) 10 2 20 40 60 120 80 100 160140 10 10 3 10 4 ptf_04bb471q2n34b0 resistance () 0 temperature (c) 10 3 C20 40 60 120 80 100 140 10 2 10 4 10 5 20 ptf_04bh222q2n34b0 continued on the following page. r90e.pdf sep.24,2012 84 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 14
continued from the preceding page. resistance () 0 temperature (c) 10 3 C20 40 60 120 80 100 140 10 2 10 4 10 5 20 c resistance - temperature characteristics range (ref. only) ptf_04bg222q2n34b0 resistance () 0 temperature (c) 10 3 C20 40 60 120 80 100 140 10 2 10 4 10 5 20 ptf_04bf222q2n34b0 resistance () 0 temperature (c) 10 3 C20 40 60 120 80 100 140 10 2 10 4 10 5 20 ptf_04be222q2n34b0 resistance () C20 temperature (c) 10 3 0 20 40 100 60 80 140 120 10 2 10 4 10 5 ptf_04bd222q2n34b0 resistance () 0 temperature (c) 10 3 20 40 60 120 80 100 160140 10 2 10 4 10 5 ptf_04bc222q2n34b0 resistance () 0 temperature (c) 10 3 20 40 60 120 80 100 160140 10 2 10 4 10 5 ptf_04bb222q2n34b0 r90e.pdf sep.24,2012 85 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 14
temperature sensor lead type speci cations and test methods posistorr is set in an environmental chamber at 853c with maximum voltage applied for 1.5 hours and then is left without voltage applied for 0.5 hours. this cycle is repeated for 100010 hours, and after the device is left at room temperature (25c) for one hour, the resistance measurement is performed. (a protective resistor is to be connected in series and the inrush current through posistor r must be limited below max. rated value.) 8 high temperature load r/r25vt20% posistorr is set in an environmental chamber at 402c and 90-95% humidity for 5004 hours. and after the device is left at room temperature (25c) for one hour, the resistance measurement is performed. 7 damp heat r/r25vt20% the lead wire of posistor r is soaked in molten solder (jis z 3282 h60a) at 35010c from the bottom to a point of 2.0-2.5 mm for 3.50.5 seconds. and, after the device is left at room temperature (25c) for 244 hours, the resistance is measured. 6 terminal durability of soldering r/r25vt15% the lead wire of posistor r is soaked in a isopropyl alcohol (jis k 8839) or ethanol (jis k 8101) solution (about 25wt%) of colophony (jis k 5902) for 5-10 sec. and, each lead wire is soaked in molten solder (jis z 3282 h60a) at 2355c from the bottom to a point of 2.0-2.5mm for 20.5 seconds. 5 solderability solder is applied around the lead wire covering 3/4 or more of the circumference without gap in the axial-direction. posistor r is held so that it is perpendicular to the lead wire with the following load hanging in the axial direction of the lead wire. the lead wire is slowly bent to 90 and returned; then it is slowly bent in the opposite direction and returned to original state. (above mentioned procedure is done slowly with one cycle.) 4 bending strength of lead wire terminal lead wire does not come off. the load is gradually applied to each terminal of posistor r until 4.90n in the axial-direction with fixing posistor r's body itself and this load is kept for 10 seconds. 3 tensile strength of lead wire terminal no damage we apply ac voltage 120% that of the maximum voltage to posistor r by raising voltage gradually for 1805 seconds at 25c. (a protective resistor is to be connected in series, and the inrush current through posistorr must be limited below max. rated value.) 2 withstanding voltage no problem resistance value is measured by applying voltage under 1.5vdc (by a direct current of less than 10ma) in a silicone oil vessel. 1 resistance value satisfies specification series force 2.45n 4.90n ptfl ptfm no. method of examination rating value item rs pth s.w test circuit r90e.pdf sep.24,2012 86 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. 14
! caution/notice c ! caution (storage and operating condition) this product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). do not use under the following conditions because all of these factors can deteriorate the characteristics or cause product failure and burn-out. 1. corrosive gas or deoxidizing gas (chlorine gas, hydrogen sul? de gas, ammonia gas, sulfuric acid gas, nitric oxide gas, etc.) 2. volatile or ? ammable gas 3. dusty conditions 4. under vacuum, or under high or low pressure 5. wet or humid conditions 6. places with salt water, oils, chemical liquids or organic solvents 7. strong vibrations 8. other places where similar hazardous conditions exist c ! caution (other) be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product. c notice (storage and operating condition) to keep solderability of product from declining, the following storage conditions are recommended. 1. storage condition: temperature -10 to +40 degrees c humidity less than 75%rh (not dewing condition) 2. storage term: use this product within 6 months after delivery by ? rst-in and ? rst-out stocking system. 3. handling after unpacking: after unpacking, promptly reseal this product or store it in a sealed container with a drying agent. 4. storage place: do not store this product in corrosive gas (sulfuric acid, chlorine, etc.) or in direct sunlight. c notice (soldering and mounting) when the lead of this product is soldered, observe the following points to avoid the decline of element characteristics or break-down of the element. 1. use rosin type ? ux or non-activated ? ux 2. do not dip the body into ? ux (? ux should be coated to lead wire only for soldering). 3. be sure that preheating does not melt the soldering of this product. c notice (soldering and mounting) 1. ptfm series is to be screwed beside the power- transistor on the radiative plate. 2. if ptfl series is to be mounted with thermal cement, the cement should not be of the cyano acrylate family. 3. please bend the lead wire far from the root of the body and do not apply force to the lead wire of the product. 4. when the lead of this product is soldered, observe the following points to avoid the decline of element characteristics or break-down of the element. (1) use rosin type ? ux or non-activated ? ux. (2) do not dip the body into ? ux. (flux should be coated to lead wire only for soldering.) (3) be sure that preheating does not melt the soldering of this product. ptgl series ptfl/ptfm series r90e.pdf sep.24,2012 87 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! caution/notice to remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes' quality. 2-propanol less than 5 minutes at room temp. or less than 2 minutes at 40?c max. less than 1 minute 20w/l frequency of several 10khz to 100khz. solvent dipping cleaning ultrasonic cleaning a sufficient cleaning should be applied to remove flux completely. (1) printing conditions of solder paste (a) standard thickness of solder paste printing should be from 0.15 to 0.20 mm. (b) after soldering, the solder fillet should be a height from 0.2 mm to the thickness of this product (see the figure at right). (c) too much solder result in excessive mechanical stress to this product. such stress may cause cracking or other mechanical damage. also, it can destroy the electrical performance of this product. in your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. the mounting quality of this product may also be affected by the mounting conditions, shown in the points below. this product is for reflow soldering only. flow soldering should not be allowed. 0.2mm v t v e t solder solder electrode 1. solder and flux 2. cleaning conditions 3. soldering conditions (1) solder paste use solder paste sn:pb=63:37wt%. for your reference, we are using 63sn/37pb rma9086 90-3-m18, manufactured by alpha metals japan ltd. 96.5sn/3.0ag/0.5cu m705-grn360-k2-v, manufactured by senju metal industry co., ltd for any internal tests of this product. (2) flux use rosin type flux in the soldering process. if the flux below is used, some problems might be caused in the product characteristics and reliability. please do not use these types of flux. s3trongacidicfluxwithhalidecontentexceeding 0.2wt%). s7ater solubleflux (*water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.) e continued on the following page. after cleaning, promptly dry this product. drying c notice (soldering and mounting) prg series r90e.pdf sep.24,2012 88 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! caution/notice (3) standard temperature profile for soldering (a) insufficient preheating may cause a crack on the ceramic body. the difference between preheating temperature and maximum temperature in the profile should be 100c. (b) rapid cooling by dipping in solvent or by other means is not recommended. soldering gradual cooling (in air) preheating (in air) 1 to 2 min. 200 100 0 240c reflow soldering conditions * in the case of repeated soldering, the accumulated soldering time should be within the range shown in "(2) allowable soldering temperature and time." *20 sec. preheating: 15010c, 1 to 2 minutes soldering: 240c, 20 sec. (4) there may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. please make sure that this product is correctly mounted under the specified mounting conditions. (2) allowable soldering temperature and time (a) solder within the temperature and time combinations, indicated by the slanted lines in the graphs at right. (b) excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) in the case of repeated soldering, the accumulated soldering time should be within the range shown at right. (for example, reflow peak temperature: 260c, twice C > the accumulated soldering time at 260c is within 15sec.) time (second) 0 102030405060 260 250 270 240 230 220 210 200 continued from the preceding page. allowable reflow soldering temp. and time temperature (c) temperature (c) r90e.pdf sep.24,2012 89 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! caution/notice (2) drying after cleaning, promptly dry this product. to remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes quality. (1) cleaning conditions 2-propanol less than 5 minutes at room temp. or less than 2 minutes at 40?c max. less than 1 minute 20w/l frequency of several 10khz to 100khz. solvent dipping cleaning ultrasonic cleaning a sufficient cleaning should be applied to remove flux completely. (1) printing conditions of solder paste (a) standard thickness of solder paste printing should be from 0.10 to 0.15 mm. (b) after soldering, the solder fillet should be a height from 0.15 mm to the thickness of this product (see the figure at right). (c) too much solder gives too strong mechanical stress to this product. such stress may cause cracking or other mechanical damage. also, it can destroy the electrical performance of this product. in your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. the mounting quality of this product may also be affected by the mounting conditions, shown in the points below. this product is for reflow soldering only. flow soldering should not be allowed. 0.15mm v t v e t solder solder electrode 1. solder and flux 2. cleaning conditions and drying 3. soldering conditions (1) solder paste use solder paste sn:pb=63:37wt%. for your reference, we are using 63sn/37pb rma9086 90-3-m18, manufactured by alpha metals japan ltd. 96.5sn/3.0ag/0.5cu m705-grn360-k2-v, manufactured by senju metal industry co., ltd for any internal tests of this product. (2) flux use rosin type flux in soldering process. if below flux is used, some problems might be caused in the product characteristics and reliability. please do not use below flux. s3trongacidicfluxwithhalidecontentexceeding 0.2wt%). s7ater solubleflux (*water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) e continued on the following page. c notice (soldering and mounting) prf15_102r series r90e.pdf sep.24,2012 90 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! caution/notice (3) there may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. please make sure that this product is correctly mounted under specified mounting conditions. (2) reflow soldering conditions the following figure and table show our recommended reflow profile. (a) insufficient preheating may cause a crack on ceramic body. the temperature difference between preheat and peak should be control within 100c to prevent this. (b) the excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) rapid cooling by dipping in solvent or by other means is not recommended. (d) please evaluate it on your condition if you will do mounting using not applying condition to the above-mentioned. continued from the preceding page. 270c 250c 220c 180c 150c 9030s 30 to 60s 90s temp. (c) time (s) limit profile standard profile preheat 150 to 180c, 9030s soldering time (u220c) 30 to 60s 90s peak temp. 250c 270c reflow cycle max. 2 times max. 2 times standard profile limit profile r90e.pdf sep.24,2012 91 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! caution/notice (2) drying after cleaning, promptly dry this product. to remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes quality. (1) cleaning conditions 2-propanol less than 5 minutes at room temp. or less than 2 minutes at 40?c max. less than 1 minute 20w/l frequency of several 10khz to 100khz. solvent dipping cleaning ultrasonic cleaning a sufficient cleaning should be applied to remove flux completely. (1) printing conditions of solder paste (a) standard thickness of solder paste printing should be from 0.10 to 0.15 mm. (b) after soldering, the solder fillet should be a height from 0.15 mm to the thickness of this product (see the figure at right). (c) too much solder gives too strong mechanical stress to this product. such stress may cause cracking or other mechanical damage. also, it can destroy the electrical performance of this product. in your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. the mounting quality of this product may also be affected by the mounting conditions, shown in the points below. this product is for reflow soldering only. flow soldering should not be allowed. 0.15mm v t v e t solder solder electrode 1. solder and flux 2. cleaning conditions and drying 3. soldering conditions (1) solder paste use solder paste sn:pb=63:37wt%. for your reference, we are using 63sn/37pb rma9086 90-3-m18, manufactured by alpha metals japan ltd. 96.5sn/3.0ag/0.5cu m705-grn360-k2-v, manufactured by senju metal industry co., ltd for any internal tests of this product. (2) flux use rosin type flux in soldering process. if below flux is used, some problems might be caused in the product characteristics and reliability. please do not use below flux. s3trongacidicfluxwithhalidecontentexceeding 0.2wt%). s7ater solubleflux (*water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) e continued on the following page. c notice (soldering and mounting) prf15_103r series r90e.pdf sep.24,2012 92 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! caution/notice (3) standard temperature profile for soldering (a) insufficient preheating may cause a crack on ceramic body. difference between preheating temperature and maximum temperature in the profile should be 100c. (b) rapid cooling by dipping in solvent or by other means is not recommended. soldering gradual cooling (in air) preheating (in air) 1 to 2 min. 200 100 0 250c reflow soldering conditions * in case of repeated soldering, the accumulated soldering time should be within the range shown above figure (2). *20 sec. preheating: 15010c, 1 to 2 minutes soldering: 250c, 20 seconds (4) there may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. please make sure that this product is correctly mounted under specified mounting conditions. (2) allowable soldering temperature and time (a) solder within the temperature and time combinations, indicated by the slanted lines in the graphs at right. (b) the excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) in case of repeated soldering, the accumulated soldering time should be within the range shown below figure. ( for example, reflow peak temperature: 260c, twice C > the accumulated soldering time at 260c is within 30 sec. ) continued from the preceding page. temperature (c) allowable reflow soldering temp. and time 280 270 260 250 240 230 220 210 0 11090 20 30 40 50 60 70 10080 10 time (sec.) temperature (c) r90e.pdf sep.24,2012 93 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! caution/notice (2) drying after cleaning, promptly dry this product. to remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes' quality. (1) cleaning conditions 2-propanol less than 5 minutes at room temp. or less than 2 minutes at 40?c max. less than 1 minute 20w/l frequency of several 10khz to 100khz. solvent dipping cleaning ultrasonic cleaning a sufficient cleaning should be applied to remove flux completely. in your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. the mounting quality of this product may also be affected by the mounting conditions, shown in the points below. (1) printing conditions of solder paste (a) recommended thickness of solder paste printing should be from 0.15 to 0.20mm. (b) after soldering, the solder fillet should be a height from 0.2 mm to the thickness of this product (see the figure at right). (c) too much solder result in excessive mechanical stress on this product. such stress may cause cracking or other mechanical damage. also, it can destroy the electrical performance of this product. 0.2mm v t v e t solder solder electrode 1. solder and flux 2. cleaning conditions and drying 3. soldering conditions (1) solder paste (a) flow soldering: use sn:pb=60:40wt%, sn:pb=63:37wt%, sn:ag:cu=96.5:3.0:0.5wt% or equivalent type of solder. (b) reflow soldering: use sn:pb=60:40wt%, sn:pb=63:37wt%, sn:ag:cu=96.5:3.0:0.5wt% or equivalent type of solder paste. for your reference, we are using "63sn/37pb rma9086 90-3-m18," manufactured by alpha metals japan ltd., "96.5sn/3.0ag/0.5cu m705-grn360-k2-v," manufactured by senju metal industry co., ltd. for any internal tests of this product. (2) flux use rosin type flux in the soldering process. if the flux below is used, some problems might be caused in the product characteristics and reliability. please do not use these types of flux. s3trongacidicfluxwithhalidecontentexceeding 0.2wt%). s7ater solubleflux (*water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.) e continued on the following page. c notice (soldering and mounting) prf18/21 series r90e.pdf sep.24,2012 94 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! caution/notice continued from the preceding page. allowable reflow soldering temp. and time (2) adhesive application and curing (a) if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, this product may have a loose contact with the land, during flow soldering. (b) too low viscosity of adhesive causes this product to slip on the board, after mounting. (3) allowable soldering temperature and time (a) solder within the temperature and time combinations, indicated by the slanted lines in the following graphs. (b) excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) in the case of repeated soldering, the accumulated soldering time should be within the range shown in the figures below. (for example, reflow peak temperature: 260c, twice C> the accumulated soldering time at 260c is within 30sec.) (4) recommendable temperature profile for soldering (a) insufficient preheating may cause a crack on the ceramic body. the difference between preheating temperature and maximum temperature in the profile should be 100c. (b) rapid cooling by dipping in solvent or by other means is not recommended. (5) there may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process caused by mounting conditions. please make sure that this product is correctly mounted under the specified mounting conditions. soldering gradual cooling (in air) preheating (in air) 1 to 2 min. 200 100 0 250c flow soldering conditions * in the case of repeated soldering, the accumulated soldering time should be within the range shown in "(3) allowable soldering temperature and time." *3 sec. preheating: 15010c, 1-2 minutes. soldering: 250c, 3 sec. temperature (c) soldering gradual cooling (in air) preheating (in air) 1 to 2 min. 200 100 0 250c reflow soldering conditions * in the case of repeated soldering, the accumulated soldering time should be within the range shown in "(3) allowable soldering temperature and time." *20 sec. preheating: 15010c, 1-2 minutes. soldering: 250c, 20 sec. temperature (c) time (sec.) 0102030 260 250 270 240 230 220 210 200 allowable flow soldering temp. and time temperature (c) 280 270 260 250 240 230 220 210 0 11090 20 30 40 50 60 70 10080 10 time (sec.) temperature (c) r90e.pdf sep.24,2012 95 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! caution/notice c notice (handling) 1. do not apply an excessive force to the lead. otherwise, it may cause the junction between lead and element to break, or may crack the element. therefore, holding the element side lead wire is recommended when lead wire is bent or cut. 2. this product does not have waterproof construction. splashed water may cause failure mode such as decline of characteristics or current leak. 3. when this product is operated, the temperature of some areas may be over 100 to 160 degrees c. be sure that surrounding parts and inserting material can withstand the temperature. if the surrounding part and material are kept under such conditions, they may deteriorate or produce harmful gas (chlorine gas, hydrogen sul? de gas, ammonia gas, sulfuric acid gas, nitric oxide gas, etc.), and such harmful gas may deteriorate the element. c notice (handling) 1. do not apply an excessive force to the lead. otherwise, it may cause the junction between lead and element to break, or may crack the element. therefore, holding the element side lead wire is recommended when lead wire is bent or cut. 2. this product does not have waterproof construction. splashed water may cause failure mode such as decline of characteristics or current leak. c notice (handling) 1. when this product is operated, the temperature of some area may be over 100 to 150 degrees c. be sure that surrounding parts and inserting material can withstand the temperature. if the surrounding parts and material are kept under such conditions, they may deteriorate or produce harmful gas (chlorine gas, hydrogen sul? de gas, ammonia gas, sulfuric acid gas, nitric oxide gas, etc.), and such harmful gas may deteriorate the element. 2. do not assemble this product with air-sealing or resin casting. such sealing may deteriorate element. ptgl series ptfl/ptfm series prg/prf series r90e.pdf sep.24,2012 96 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
chip type prg/prf series package *1.05 direction feed 1.1 max. 1.750.1 4.00.1 2.00.1 4.00.1 3.50.05 8.00.3 (1.85) (in mm) (in mm) ?13.00.2 ?21.00.8 9.0 ?60 ?180 w0 y1.5 w1.0 y0 w1.0 y0 2.00.5 13.01.0 reel dimensions part number quantity (pcs.) paper tape embossed tape prf15_rc pr*18_rb pr*21_ra pr*21_rk 10,000 4,000 - - - - 4,000 3,000 1.450.1 direction feed 1.750.1 4.00.1 4.00.1 2.00.1 3.50.05 8.00.3 ?1.5 w0.1 y0 2.250.1 ?1.00.1 1.300.05 0.250.05 1.45 direction feed 1.750.1 4.00.1 4.00.1 2.00.1 3.50.05 8.00.3 ?1.0 w0.3 y0 ?1.5 w0.1 y0 2.25 1.1 0.2 prf15_rc series: paper tape pr*18_rb series: paper tape pr*21_ra series: embossed tape pr*21_rk series: embossed tape c minimum quantity guide c tape dimensions c reel dimensions *0.65 direction of feed * reference value * reference value 0.8 max. 1.750.1 2.00.05 4.00.1 3.50.1 8.00.3 ?1.5 w0.1 y0 *1.15 ?1.5 w0.1 y0 r90e.pdf sep.24,2012 97 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
lead type ptgl/ptf series package series part number min. qty. min. qty. part number bulk type narrow current band 30v series narrow current band 51v series narrow current band 60v series narrow current band 140v series 16v series 24v series 30v series 32v series 56v series 500 300 500 300 500 300 500 300 500 300 500 500 300 500 500 300 ptgl04as100k2b51b0 ptgl04as100k2n51b0 ptgl05as3r9k2b51b0 ptgl07as2r7k2b51b0 ptgl07as1r8k2b51b0 ptgl09as1r2k2b51b0 ptgl12as0r8k2b51b0 ptgl04as100k3b51b0 ptgl05as6r8k3b51b0 ptgl07as3r3k3b51b0 ptgl09as2r2k3b51b0 ptgl12as1r2k3b51b0 ptgl04as220k4b51b0 ptgl04as220k4n51b0 ptgl05as100k4b51b0 ptgl07as5r6k4b51b0 ptgl07as5r6k4n51b0 ptgl09as3r3k4b51b0 ptgl12as2r2k4b51b0 ptgl04as560k6b51b0 ptgl05as270k6b51b0 ptgl07as150k6b51b0 ptgl09as120k6b51b0 ptgl09as7r6k6b51b0 ptgl12as4r7k6b51b0 ptgl05ar1r0m1b51b0 ptgl06ar0r8m1b51b0 ptgl07arr47m1b51b0 ptgl09arr33m1b51b0 ptgl10arr27m1b51b0 ptgl12ar0r2m1b51b0 ptgl14arr15m1b51b0 ptgl07bd100n2b51b0 ptgl07bd6r8n2b51b0 ptgl09bd4r7n2b51b0 ptgl09bd3r3n2b51b0 ptgl09bd2r2n2b51b0 ptgl04ar130h2b51b0 ptgl07ar4r6h2b51b0 ptgl09ar1r8h2b51b0 ptgl12ar1r2h2b51b0 ptgl13ar0r8h2b71b0 ptgl07bd470n3b51b0 ptgl07bd330n3b51b0 ptgl07bd220n3b51b0 ptgl07bd150n3b51b0 ptgl07ar220m3p51b0 ptgl07ar8r2m3p51b0 ptgl09ar150m3b51b0 ptgl10ar3r9m3p51b0 ptgl09ar4r7m3b51b0 ptgl10ar3r9m3b51b0 ptgl14ar3r3m3b71b0 ammo pack taping type 1500 1500 1500 1500 2000 - 1500 1500 - - 1500 1500 - ptgl04as100k2b51a0 ptgl04as100k2n51a0 ptgl05as3r9k2b51a0 ptgl07as2r7k2b51a0 ptgl07as1r8k2b51a0 ptgl09as1r2k2b51a0 ptgl12as0r8k2b51a0 ptgl04as100k3b51a0 ptgl05as6r8k3b51a0 ptgl07as3r3k3b51a0 ptgl09as2r2k3b51a0 ptgl12as1r2k3b51a0 ptgl04as220k4b51a0 ptgl04as220k4n51a0 ptgl05as100k4b51a0 ptgl07as5r6k4b51a0 ptgl07as5r6k4n51a0 ptgl09as3r3k4b51a0 ptgl12as2r2k4b51a0 ptgl04as560k6b51a0 ptgl05as270k6b51a0 ptgl07as150k6b51a0 ptgl09as120k6b51a0 ptgl09as7r6k6b51a0 ptgl12as4r7k6b51a0 ptgl05ar1r0m1b51a0 ptgl06ar0r8m1b51a0 ptgl07arr47m1b51a0 ptgl09arr33m1b51a0 ptgl10arr27m1b51a0 ptgl12ar0r2m1b51a0 - ptgl07bd100n2b51a0 ptgl07bd6r8n2b51a0 ptgl09bd4r7n2b51a0 ptgl09bd3r3n2b51a0 ptgl09bd2r2n2b51a0 ptgl04ar130h2b51a0 ptgl07ar4r6h2b51a0 ptgl09ar1r8h2b51a0 - - ptgl07bd470n3b51a0 ptgl07bd330n3b51a0 ptgl07bd220n3b51a0 ptgl07bd150n3b51a0 ptgl07ar220m3p51a0 ptgl07ar8r2m3p51a0 ptgl09ar150m3b51a0 ptgl10ar3r9m3p51a0 ptgl09ar4r7m3b51a0 ptgl10ar3r9m3b51a0 - 80v series 125v series 140v series 250v series 265v series 500 300 500 300 250 150 100 500 300 250 200 150 - - - 500 300 200 150 100 ptgl05ar550h4p51b0 ptgl07ar250h4b51b0 ptgl09ar9r4h4b51b0 ptgl12ar5r6h4b71b0 ptgl13ar3r7h4b71b0 ptgl05ar181m7p52b0 ptgl07ar750m7b52b0 ptgl09ar470m6b52b0 ptgl09ar220m6b52b0 ptgl12ar150m6b72b0 ptgl14ar100m6b72b0 ptgl18ar6r8m6b72b0 ptgl18ar4r7m6b72b0 ptgl18ar3r3m6b72b0 ptgl07ar330m6a51b0 ptgl09ar220m6c61b0 ptgl10ar150m6c61b0 ptgl12ar100m6c01b0 ptgl13ar6r8m6c01b0 ptgl16ar5r6m6c01b0 - - - ptgl05ar151h8p52b0 ptgl05ar181m9n51b0 ptgl05ar121m9n51b0 ptgl07ar820m9a51b0 ptgl07ar700h8b52b0 ptgl07ar650h8b52b0 ptgl07ar450h8b52b0 ptgl07ar560m9a51b0 ptgl09ar390m9c61b0 ptgl09ar250h8b52b0 ptgl12ar270m9c01b0 ptgl12ar150h8b72b0 ptgl14ar180m9c01b0 ptgl13ar100h8b72b0 ptgl18ar6r0h8b72b0 1500 - - 1500 1000 - - - - - - - - - - - 1000 1000 - - - 1000 1000 1000 - - 1000 - - - - - ptgl05ar550h4p51a0 ptgl07ar250h4b51a0 ptgl09ar9r4h4b51a0 - - ptgl05ar181m7p52a0 ptgl07ar750m7b52a0 ptgl09ar470m6b52a0 ptgl09ar220m6b52a0 - - - - - - - - - - - ptgl07bb220n0b52a0 ptgl09ar390n0b52a0 ptgl10bb120n0p52a0 ptgl05ar151h8p52a0 - - - ptgl07ar700h8b52a0 ptgl07ar650h8b52a0 ptgl07ar450h8b52a0 - - ptgl09ar250h8b52a0 - - - - - series part number min. qty. min. qty. part number bulk type ammo pack taping type c minimum order quantity (for overcurrent protection) less than 100f series 100f or more series 500 500 500 150 150 150 150 150 100 100 ptgl07as121m0n51b0 ptgl07as181m0n51b0 ptgl07as201m0n51b0 ptgl14as470h0b02bz ptgl16as330h0b02bz ptgl16as470h0b02bz ptgl16as680h0b02bz ptgl16as101h0b02bz ptgl20as330h0d02bz ptgl20as470h0d02bz 1000 1000 1000 - - - - - - - ptgl07as121m0n51a0 ptgl07as181m0n51a0 ptgl07as201m0n51a0 - - - - - - - ptf series 400 200 ptfl series ptfm series - - - - c minimum order quantity (for inrush current suppression) c minimum order quantity (for overheat sensing) continued on the following page. r90e.pdf sep.24,2012 98 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
lead type ptgl/ptf series package continued from the preceding page. pitch of component pitch of sprocket hole lead spacing length from hole center to lead length from hole center to component center body diameter body thickness deviation along tape, left or right defect carrier tape width position of sprocket hole lead distance between reference and bottom planes protrusion length diameter of sprocket hole lead diameter total tape thickness total thickness of tape and lead wire deviation across tape portion to cut in case of defect hold down tape width hold down tape position coating extension on lead p p 0 f p 1 p 2 d t s w w 1 h 0 h 2 i d 0 d t 1 t 2 h 1 , h 2 l w 0 w 2 e 12.7 12.70.3 5.0 3.850.8 6.351.3 please see in ratings please see in ratings 1.5 18.00.5 16.01.0 6.0 max. +0.5 to C1.0 4.00.2 please see in ratings 0.60.3 2.0 max. 1.5 max. 11.0 min. 4.0 max. up to the center of crimp tolerance is determined by s. deviation in the feeding direction including the inclination caused by lead bending deviation of tape width code item dimensions (mm) note +0.8 C0.3 9.0 +0.5 C0.75 11.0 +0 C2.0 w 0 w 2 w w 1 h 0 h 2 h 2 h 1 e s p 2 p d p 1 p 0 f d l ?d 0 l t 2 t 1 t c narrow current band 30 - 140v series / 16 - 80v series / inrush current suppression taping dimensions continued on the following page. r90e.pdf sep.24,2012 99 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
lead type ptgl/ptf series package continued from the preceding page. pitch of component pitch of sprocket hole lead spacing length from hole center to lead length from hole center to component center body diameter deviation along tape, left or right carrier tape width position of sprocket hole lead distance between reference and bottom planes protrusion length diameter of sprocket hole lead diameter total tape thickness total thickness of tape and lead wire deviation across tape portion to cut in case of defect hold down tape width hold down tape position coating extension on lead p p 0 f p 1 p 2 d s w w 1 h 0 h 2 i d 0 d t 1 t 2 h 1 , h 2 l w 0 w 2 e 12.7 12.70.3 5.0 3.850.8 6.351.3 please see ratings body thickness t please see ratings 1.5 18.00.5 16.01.0 6.0 max. w0.5 to y1.0 4.00.2 0.60.05 0.60.3 2.0 max. 1.5 max. 11.0 min. 4.0 max. up to the center of crimp tolerance is determined by s. deviation in the feeding direction including the inclination caused by lead bending. deviation of tape width. code item dimensions (mm) note +0.8 C0.3 9.0 +0.5 C0.75 11.0 +0 C2.0 w 0 w 2 w w 1 h 0 h 2 h 2 h 1 e s p 2 p d p 1 p 0 f d l ?d 0 l t 2 t 1 t c 125/250/265v series taping dimensions r90e.pdf sep.24,2012 100 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
! note r90e.pdf sep.24,2012 ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering.
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: murata: ? prf21ar471qb2ra? prf21ar471qb3ra? prf21ba471qb1ra? prf18bd471qb2rb? prf18bb471qb2rb? prf18bf471qb2rb? prf18be471qb2rb? prf18ba471qb2rb? prf18bg471qb2rb? prf18bc471qb2rb? prf18ar471qs2rb? prf21as471qb2ra? prf21bc471qb3ra? prf21bb471qb1ra? prf21bd471qb1ra? prf21bc471qb1ra? prf21be471qb1ra? prf21ar471qb1ra? prf21as471qb1ra? prf18ba471qs2rb? prf18bc471qb1rb? prf18bb471qb1rb? prf18bf471qb1rb? prf18as471qb1rb? prf18ar471qb1rb? prf18ar471qb2rb? prf18as471qb2rb? prf18bd471qb1rb? prf18be471qs2rb? prf18bc471qs2rb? prf18bg471qs2rb? prf18bf471qs2rb? prf18bd471qs2rb? prf21ba471qb2ra? prf21be471qb2ra? prf21bc471qb2ra? prf21bb471qb2ra? prf21bd471qb2ra? prf18be471qb1rb? prf18ba471qb1rb? prf18bg471qb1rb? prf18ar471qb5rb? prf18as471qb5rb? prf18ba471qb5rb? prf18bb471qb5rb? prf18bc471qb5rb? prf18bd471qb5rb? prf18be471qb5rb? prf18bf471qb5rb? prf18bg471qb5rb? prf21ar471qb5ra? prf21as471qb5ra? prf21ba471qb5ra? prf21bb471qb5ra? prf21bc471qb5ra? prf21bd471qb5ra? prf21be471qb5ra

▲Up To Search▲

Price & Availability of PRF15BB102RB6RC

	To Download PRF15BB102RB6RC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .